Stopping Open DNS - MikroTik: Difference between revisions

From AAISP Support Site
(Add initial content)
 
mNo edit summary
 
(One intermediate revision by one other user not shown)
Line 3: Line 3:
''(may be relevant for other models)''
''(may be relevant for other models)''


A DNS server is not running by default, but can be configured under <code>/ip dns</code> (or the "IP / DNS" GUI menu), in which case the router will act as an [[Category:Open DNS Resolvers|Open DNS resolver]].
A DNS server is not running by default, but can be configured under <code>/ip dns</code> (or the "IP / DNS" GUI menu), in which case the router will act as an [[:Category:Open DNS Resolvers|open DNS resolver]].


A firewall filter rule can prevent incoming DNS traffic on the WAN interface:
A firewall filter rule can prevent incoming DNS traffic on the WAN interface:
Line 20: Line 20:


[[Category:Open DNS Resolvers]]
[[Category:Open DNS Resolvers]]
[[Category:Router]]
[[Category:3rd Party Routers]]

Latest revision as of 09:22, 25 February 2015

MikroTik RouterBoard 951-2n

(may be relevant for other models)

A DNS server is not running by default, but can be configured under /ip dns (or the "IP / DNS" GUI menu), in which case the router will act as an open DNS resolver.

A firewall filter rule can prevent incoming DNS traffic on the WAN interface:

 /ip firewall filter
 add chain=input action=drop protocol=tcp in-interface=pppoe-out1 dst-port=53
 add chain=input action=drop protocol=udp in-interface=pppoe-out1 dst-port=53

(replace ppoe-out1 with your external interface name obtained from /interface print).

You can also configure this in the GUI under "IP / Firewall / Filter Rules":

Mikrotik external dns block.png

Thanks to Jay Pudasaini for the general solution.