Stopping Open DNS - ZyXEL P660R-D1: Difference between revisions
(Created page with "The factory setting for this router is for DNS to be open on the WAN. This will be changed when configured by AAISP, but if it is configured from new, or reset, then WAN side ...") |
No edit summary |
||
| Line 8: | Line 8: | ||
sys server access dns 2 |
sys server access dns 2 |
||
sys save |
sys save |
||
This also applies to the P-660HW-T1 v2 Router |
|||
[[:Category:Open DNS Resolvers]] |
|||
[[:Category:Router]] |
|||
Revision as of 10:06, 18 June 2013
The factory setting for this router is for DNS to be open on the WAN. This will be changed when configured by AAISP, but if it is configured from new, or reset, then WAN side DNS will need to be disabled. This can be done from the web interface, go to:
Advanced - Remote MGMT - DNS - LAN Only
Or from the CLI (telnet):
sys server load sys server access dns 2 sys save
This also applies to the P-660HW-T1 v2 Router