editor
698
edits
Ubuntu 16.04 Full Stack Configuration (with Bonding Config): Difference between revisions
Ubuntu 16.04 Full Stack Configuration (with Bonding Config) (view source)
Revision as of 00:22, 18 August 2018
, 18 August 2018clean up, typos fixed: ie. → i.e. , controled → controlled, eg: → e.g.:
No edit summary |
(clean up, typos fixed: ie. → i.e. , controled → controlled, eg: → e.g.:) |
||
| (5 intermediate revisions by 2 users not shown) | |||
|
<indicator name="Front">[[File:Menu-bonding.svg|link=:Category:Bonding|30px|Back up to the Bonding Page]]</indicator>
[[Category:Routers]]
[[Category:Bonding Configuration]]
[[Category:3rd Party Routers]]
= Preface =
linkname aa_wan1
Note the additional “unit” and “linkname” instructions from the linked guide, “unit” is in the index of the ppp connection created (
=== /etc/ppp/chap-secrets ===
iptables -t nat -A POSTROUTING -o DEV_AA_WAN2_C -m comment --comment NAT -j MASQUERADE
# Default drop everything from outside
# Note that these drops are *important* because we don't reject any traffic in the rules themselves, without these, stuff will be wide open
iptables -P FORWARD DROP
iptables -P INPUT DROP
START_DAEMON=1
# Define here the external interface connected to the WAN (
# IP address NIC)
MiniUPnPd_EXTERNAL_INTERFACE="pppoe-AA_1"
# IP that the daemon should listen on.
# Note that you do *not* want this to be 0.0.0.0, as you don't want
# your MiniUPnPd to be
MiniUPnPd_LISTENING_IP=”DEV_LAN”
chmod 0755 /etc/ppp/ip-up.d/fix-upnp
chmod +x /etc/ppp/ip-up.d/fix-upnp
= Bonus: Run dslstats in Docker on Ubuntu =
I'll add this section because some people may find it useful if you either want dslstats for your own use directly or to submit to something like [https://www.mydslwebstats.co.uk/ MyDSLWebStats].
== Install Docker ==
Install Docker, we'll get a better version than what is in the normal repos:
apt-get install apt-transport-https ca-certificates curl software-properties-common
curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
# Assuming amd64
add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable"
apt-get update
apt-get install docker-ce
== Download & Run Container ==
Now we have docker, all we need to do is download and run the container, which can be done in a single command. This command will do the following:
* Names the container "dslstats_1"
* Opens a VNC server on 192.168.1.1:5900 (you should specifically set the router IP like I have to make sure it's only accessible privately)
* Opens a tcp listener on port 192.168.1.1:8080 - this won't actually do anything unless you enable the web server for dslstats
* Sets the password to login to VNC to "dslstats"
* Sets the path for the dslstats configurtion to be '''/etc/dslstats_1/''' on the '''host'''
* Mounts /etc/localtime from the host to use the correct timezone data
* Restarts the container as soon as the Docker daemon starts (should be on each reboot)
docker run -d \
--name=dslstats_1 \
-p 192.168.1.1:5900:5900 \
-p 198.168.1.1:8080:8080 \
-e "VNC_PASSWORD"="dslstats"
-v /etc/dslstats_1:/config \
-v /etc/localtime:/etc/localtime:ro \
--restart=always
rossallan/dslstats
Obviously if you are running 2 modems you wish to report stats for, you will need a second MyDSLWebStats account (if you are submitting there), and to modify this command for the second container to use different ports and configuration directory.
For more information about Docker installation, see [https://docs.docker.com/engine/installation/linux/ubuntu/#install-using-the-repository here], and for more information about the dslstats Docker container, see [https://hub.docker.com/r/rossallan/dslstats/ here].
= Bonus: Port based policy routing to a third WAN =
| |||