VMG1312-B10A: Factory Reset: Difference between revisions
mNo edit summary |
|||
|
A factory reset router will also be send an updated firmware if there is one available.
==Reset to the ZyXEL Factory Settings==
To erase the default AAISP settings, the 'ROM-D' needs to be cleared, this is done via the CLI (Telnet or SSH) using the supervisor user and then issuing the 'save_default clean' command.
Here is an example:
</syntaxhighlight>
At this point you can reset the router for this to be applied. The router will then boot up in it's original factory settings without any of the AAISP configuration settings. You can reset the router by holding in the reset button for 5 seconds.
[[Category:ZyXEL_VMG1312|Reset]]
| |||