VMG1312-B10A: Factory Reset: Difference between revisions

m (Be consistent about "Base Settings")
m (Minor changes)
==Reset to the ZyXEL Factory Settings==
 
To erase the default AAISP settings, the 'ROM-D' file needs to be cleared, this is done via the CLI (Telnet or SSH) using the supervisor user and then issuing the <syntaxhighlight inline enclose="none">save_default clean</syntaxhighlight> command.
 
Here is an example:
</syntaxhighlight>
 
At this point you can reset the router for this to be applied. The router will then boot up in it'sits original factory settings without any of the AAISP configuration settings. You can reset the router by holding in the reset button for 5 seconds.
 
In this state, the router has itsZyXEL's default IP address, username and password.
 
=Adding the AAISP rom-d file=
Retrieved from ‘http://support.aa.net.uk/VMG1312-B10A:_Factory_Reset’