VMG1312-B10A: QoS: Difference between revisions

← Older edit

VMG1312-B10A: QoS (view source)

Revision as of 01:31, 11 December 2020

68 bytes added , 11 December 2020

m

no edit summary

CecilWard

252

edits

Revision as of 15:37, 7 July 2017 (view source) AA-Andrew (talk \| contribs) m (AA-Andrew moved page VMG1312: QoS to VMG1312-B10A: QoS) ← Older edit		Latest revision as of 01:31, 11 December 2020 (view source) CecilWard (talk \| contribs) mNo edit summary
(3 intermediate revisions by 2 users not shown)
The examples below are when using the VMG1312 in router mode on a FTTC line. The VMG1312 is plugged directly in to the phone line (via a SSFP), and providing a firewalled, no-nat and DHCP connection to the LAN. The QoS settings on the VMG1312 will control the upload traffic. Download is already ~~handle led~~handled at the AAISP side where we give priority to small packets as well as the option to rate -limit the line slightly to improve performance. ==The ~~affect~~effect of disabling QoS== Here we are running a backup job, an rsync (over ssh). Just after 7am QoS is disabled for around 30 minutes. The latency (blue) immediately jumps up to an average of 350ms. It was less than 20ms with QoS enabled. [[File:ZyXEL-VMG1312-Qos-OnOff-CQM.png\|none\|frame\|Standard QoS enabled, then disabled, then enabled]] ==Problems with default settings== ==Customer Feedback== We welcome any customer feedback as to these QoS settings. We're happy for customers to modify their config if they would like, but these settings would get overwritten if a config is ever ~~send~~sent from the AAISP side to the router. [[Category:ZyXEL VMG1312-B10A\|QoS]] [[Category:ZyXEL VMG3925 B10C\|QoS]] [[Category:ZyXEL VMG1312 B10D\|QoS]]