View source for VMG1312-B10A: Static Routes

Static routes can be applied manually. This allows a second block of IP addresses allocated by AAISP to be routed to a router on your LAN on the inside of the ZyXEL router, eg

 INTERNET --> ZyXEL --> ROUTER --> LAN

The static route can be added via the web interface:

 Network Setting -> Routing -> Add new static route

Here is an example:

[[File:VMG-static.png|frame|none|Creating a Static Route]]

[[File:ZyXEL-staticroute.png|frame|none|The new Static route, as shown on the routes page]]

==CLI==
From the CLI (telnet/SSH) you can view the route table with:
 route show

The list should display immediately, if there are pauses between showing the default routes and the new static then this could be an indication of a problem with DNS look-ups and should not affect the actual routing.


[[Category:ZyXEL_VMG1312|Static]]