VMG1312-B10A: WiFi Tips: Difference between revisions

From AAISP Support Site
mNo edit summary
(clean up)
 
(9 intermediate revisions by 2 users not shown)
Line 7: Line 7:
By default the router will choose the channel with the least noise. If required though, the channel can be set manually via the web interface
By default the router will choose the channel with the least noise. If required though, the channel can be set manually via the web interface
Network Setting - Wireless
Network Setting - Wireless

==TKIP & AES==
We remove TKIP from the WiFi settings and only have AES. This is due to the insecurity of TKIP. Only very old WiFi devices will require TKIP, it can be enabled on the Router's web interface if required.


==Bandwidth==
==Bandwidth==
By default, when configured by AAISP, the Wifi is set to 20Mhz. This can be changed via the web interface to 40Mhz if required. 20Mz will mean less interference with other channels, but 40Mhz may give faster speeds if there are a small number of other WiFi access points in your area.
By default, when configured by AAISP, the Wifi is set to 20 MHz. This can be changed via the web interface to 40 MHz if required. 20 MHz will mean less interference with other channels, but 40 MHz may give faster speeds if there are a small number of other WiFi access points in your area.


[[File:VMG1312-wifi-settings.png|none|frame|WiFi Channel and bandwidth Settings]]
[[File:VMG1312-wifi-settings.png|none|frame|WiFi Channel and bandwidth Settings]]


===Windows 10 and 40MHz===
[[Category:ZyXEL_VMG1312|WiFi Tips]]
We have seen odd problems with WiFi on 40 MHz and Windows 10 not being able to see other devices on the (wired) network. This may be coincidence, but changing to 20 MHz meant that these problems went away!


[[Category:ZyXEL VMG1312-B10A|WiFi Tips]]

Latest revision as of 00:22, 18 August 2018

Channel and Channel Noise

The VMG1312 has a WiFi scan option that will show you the noise on the wireless channels. This setting can be found on the web interface:

Network Setting - Wireless - Channel Status
WiFi scan result example, here 3 is the channel in use, and 11 is the most noisy

By default the router will choose the channel with the least noise. If required though, the channel can be set manually via the web interface

Network Setting - Wireless

TKIP & AES

We remove TKIP from the WiFi settings and only have AES. This is due to the insecurity of TKIP. Only very old WiFi devices will require TKIP, it can be enabled on the Router's web interface if required.

Bandwidth

By default, when configured by AAISP, the Wifi is set to 20 MHz. This can be changed via the web interface to 40 MHz if required. 20 MHz will mean less interference with other channels, but 40 MHz may give faster speeds if there are a small number of other WiFi access points in your area.

WiFi Channel and bandwidth Settings

Windows 10 and 40MHz

We have seen odd problems with WiFi on 40 MHz and Windows 10 not being able to see other devices on the (wired) network. This may be coincidence, but changing to 20 MHz meant that these problems went away!