Vigor 2820 with 3G Sim Fallback: Difference between revisions

From AAISP Support Site
No edit summary
(clean up)
 
(15 intermediate revisions by 3 users not shown)
Line 1: Line 1:
= Falling Back =
= Overview =


Although we've seen problems with some Vigor routers in the past (i.e. 2600 having problems with ADSL Max), some customers do use them and were interested in how they work with the AAISP 3G Data sims for fallback. We configured one, and here is details on the config (pretty straight forward) and how it worked falling back to 3G.
[[Image:Vigor-2820-ADSL-connected.png|thumb]]For testing this, we used an AAISP ADSL line along with an AAISP Data SIM.

= Configuration =

Here are screenshots of the various WAN settings page, with fallback settings etc... <br>

[[Image:Vigor-2820-WAN-Settings.png|thumb|center]][[Image:Vigor-2820-WAN-ADSL-Settings.png|thumb|center]][[Image:Vigor-2820-3G-Settings.png|thumb|center]]

= Falling Back =

[[Image:Vigor-2820-ADSL-connected.png|thumb|Vigor-2820-ADSL-connected.png]]For testing this, we used an AAISP&nbsp;ADSL&nbsp;line along with an AAISP&nbsp;Data SIM.


Here we plugged in the 3G USB&nbsp;dongle, and the ADSL, and the ADSL&nbsp;logged in.
Here we plugged in the 3G USB&nbsp;dongle, and the ADSL, and the ADSL&nbsp;logged in.


We then unplugged the ADSL line, and about 30 seconds later the 3G USB&nbsp;dongle connected and the router was back online.
We then unplugged the ADSL line, and about 30 seconds later the 3G USB&nbsp;dongle connected and the router was back online.

When the ADSL line was plugged back in again the router gained sync and logged in, and thendisconnected the 3G Dongle.

At the moment (November 2010) The Data SIM and ADSL&nbsp;line had separate WAN&nbsp;IP&nbsp;addresses, and we're unable to route blocks of IPs to the Data SIM.

[[Image:Vigor-2820-3G-connected.png|thumb|Vigor-2820-3G-connected.png]]


When the ADSL&nbsp;line was plugged back in again the router gained sync and logged in, and thendisconnected the 3G Dongle.


At the moment (November 2010) The Data SIM and ADSL&nbsp;line had separate WAN&nbsp;IP&nbsp;addresses, and we're unable to route blocks of IPs to the Data SIM.


[[Image:Vigor-2820-3G-connected.png|thumb]]
[[Category:3rd Party Routers|Vigor 2820]]
[[Category:Data SIM Devices]]

Latest revision as of 00:19, 18 August 2018

Overview

Although we've seen problems with some Vigor routers in the past (i.e. 2600 having problems with ADSL Max), some customers do use them and were interested in how they work with the AAISP 3G Data sims for fallback. We configured one, and here is details on the config (pretty straight forward) and how it worked falling back to 3G.

Configuration

Here are screenshots of the various WAN settings page, with fallback settings etc...

Vigor-2820-WAN-Settings.png
Vigor-2820-WAN-ADSL-Settings.png
Vigor-2820-3G-Settings.png

Falling Back

Vigor-2820-ADSL-connected.png

For testing this, we used an AAISP ADSL line along with an AAISP Data SIM.

Here we plugged in the 3G USB dongle, and the ADSL, and the ADSL logged in.

We then unplugged the ADSL line, and about 30 seconds later the 3G USB dongle connected and the router was back online.

When the ADSL line was plugged back in again the router gained sync and logged in, and thendisconnected the 3G Dongle.

At the moment (November 2010) The Data SIM and ADSL line had separate WAN IP addresses, and we're unable to route blocks of IPs to the Data SIM.

Vigor-2820-3G-connected.png