12,271
edits
This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!
= [[Image:Gigaset-S685ip.jpg|right]]Configuring a Siemens S685IP for AAISP =
== Firewall settings: ==
Most probably, all outbound traffic will already be enabled, so it is just necessary to permit essential incoming▼
▲Most probably, all outbound traffic will already be enabled, so it is just necessary to permit essential incoming traffic to the S685IP. The following inbound settings are needed:
For
For RTP audio, allow UDP ports 5004-5020 from anywhere.
Use a good password and consider using IP lockdown on the AAISP control pages to help prevent fraudulent use!▼
▲Use a good password and consider using IP lockdown on the AAISP control pages to help prevent fraudulent use!
==Configuring the S685IP==▼
▲== Configuring the S685IP ==
If there are problems in setting up the S685IP it is easiest to start from a factory reset condition. This can be achieved by holding the blue button on the front of the base unit while power cycling it. After this the handset will need to be re-registered with the base unit (hold the blue button on the base unit while power cycling the handset). The pin should be changed from its default value of 0000 using the handset.
Starting from a factory reset, the following items need to be set using the web server in the base unit.▼
▲Starting from a factory reset, the following items need to be set using the web server in the base unit.
===IP address: ===▼
connecting to "Settings -> IP Configuration", selecting "Static" and filling in the address details as required.▼
▲=== IP address: ===
▲By default the base unit picks up an ip address using DHCP. This can be over-ridden by connecting to "Settings -
===Registration with AAISP:===▼
Select menu "Settings -> Telephony -> Connections" and click the "Edit" button for▼
<br>
'''Authentication Name: <aaisp phone number> '''▼
(this can be in either UK or international format, for example▼
▲=== Registration with AAISP: ===
(This is the same password that is set on the AAISP control pages for this number. Some non-alphanumeric characters can cause registration failure. In particular avoid "#" and "/")▼
▲Select menu "Settings -
▲'''Authentication Name: <aaisp phone number> ''' (this can be in either UK or international format, for example +44203095nnnn or 0203095nnnn )
'''Domain:''' proxy.aasip.co.uk (Don't accidentally type aaisp!)▼
▲''Authentication password: <password> '' (This is the same password that is set on the AAISP control pages for this number.
'''Proxy server address:''' proxy.aasip.co.uk▼
'''Registrar server:''' proxy.aasip.co.uk▼
All the other fields can be left as they are unless you are using NAT in which case the "Stun enabled" button▼
=== Audio settings:===▼
In menu "Settings -> Telephony -> Audio" select "Voice Quality - Own Codec preference". For "IP1" remove all▼
▲All the other fields can be left as they are unless you are using NAT in which case the "Stun enabled" button should be selected and the "Stun server" set to stun.aaisp.net
=== Other settings:===▼
If there are problems with recognition of dtmf tones by other systems consider setting "RFC2833" in the "Settings▼
When everything is entered click on the "Set" button. The display will return to the "Settings -> Telephony -> Connections" menu. Check that "IP1" is active and that the status is "Registered". You may wish to disable "Gigaset.net" in this menu. It should now be possible to make and receive calls.
▲=== Audio settings: ===
▲In menu "Settings -
▲=== Other settings: ===
▲If there are problems with recognition of dtmf tones by other systems consider setting "RFC2833" in the "Settings -> Telephony -> Advanced Settings" menu. Avoid using "Audio".
|
edits