12,270
edits
VoIP Phones - Yealink DECT: Difference between revisions
m
→From a handset
mNo edit summary |
m (→From a handset) |
||
| (11 intermediate revisions by the same user not shown) | |||
|
<indicator name="VoIPConfiguring">[[File:menu-voip.svg|link=:Category:VoIP Phones|30px|Back up to the VoIP Configuring page]]</indicator>
__NOTOC__
[[Image:W53P-1.png|thumb|Yealink
= Configuring Yealink DECT phone for AAISP =
Relevant to: '''Yealink W60B'''
!Password:
| admin
|contact us
|-
!PIN:
| 0000
|contact us
|}
The PIN is used to register handsets to the base station, and for the handset to access settings from the base station.
= IP address =
|600
|}
Repeat this for any other accounts you want to add.
===Check the SIP registration status:===
You should the the account Status as 'Registered'
[[File:Yealink W53P Hanset Assignment.png|thumb|Handset Assignment]]▼
===Handset Assignmnent===
Here you can assign which of your (up to) 8 SIP accounts are to ring which of your (up to) 8 handsets! You can also make up to 8 calls at once, so a single base station can support a small office of people.▼
▲[[File:Yealink W53P Hanset Assignment.png|thumb|Handset Assignment]]
▲Here you can assign which of your (up to) 8 SIP accounts are to ring which of your (up to) 8 handsets!
Account -> Number Assignment
===Other optonal settings===
Features -> General Information -> Call Waiting --> set to Disabled
Features -> General Information -> Number Of Active Handsets --> Set to 8 (if you have more than 4 handsets)
Features -> General Information -> Fwd International --> set to Disable (no need to allow forwarding to international numbers)
Features -> Phone Lock --> Add 999 to the list of emergency numbers
Settings -> Time&Date -> Time Zone --> 0 GMT
Settings -> Time&Date -> Primary Server --> time.aa.net.uk
Settings -> Time&Date -> Date Format --> YYYY-MM-DD
Settings -> Tones --> Set to Great Britian
Account -> Handset Name --> Give a name to each handset, will be displayed on their screen
You can enable/disable DND via the handset for each of the SIP accounts allocated to the Yealink handset:
OK --> Call Features (orange) --> Do Not Disturb
==Factory reset the Yealink DECT Base Station==
There are a few ways to factory reset the Yealink base station:
===From web ui===
Settings -> Upgrade --> Reset
===From a connected handset===
OK -> Settings -> System Settings -> Base Reset
You'll need to know the PIN (default is 0000)
===From the actual base station===
# Unplug the power
# Press and hold the Connect button
# Whilst holding, plug in the power
# Wait until all three lights on the base station are showing as solid green
# Release the connect button
# Wait a further 5 minutes
# Then, reboot the base station by unplugging it from power and plugging it back in
==Firewall & Security==
| |||