12,270
edits
VoIP Phones - Yealink DECT: Difference between revisions
m
→From a handset
m (→From a handset) |
|||
| (8 intermediate revisions by the same user not shown) | |||
|
<indicator name="VoIPConfiguring">[[File:menu-voip.svg|link=:Category:VoIP Phones|30px|Back up to the VoIP Configuring page]]</indicator>
__NOTOC__
[[Image:W53P-1.png|thumb|Yealink W60B base and handset]]
= Configuring Yealink DECT phone for AAISP =
!Password:
| admin
|contact us
|-
!PIN:
| 0000
|contact us
|}
The PIN is used to register handsets to the base station, and for the handset to access settings from the base station.
= IP address =
|600
|}
Repeat this for any other accounts you want to add.
===Check the SIP registration status:===
===Handset Assignmnent===
Here you can assign which of your (up to) 8 SIP accounts are to ring which of your (up to) 8 handsets! You can also make up to 8 calls at once, so a single base station can support a small office of people.
Account -> Number Assignment
You can enable/disable DND via the handset for each of the SIP accounts allocated to the Yealink handset:
OK --> Call Features (orange) --> Do Not Disturb
==Factory reset the Yealink DECT Base Station==
There are a few ways to factory reset the Yealink base station:
===From web ui===
Settings -> Upgrade --> Reset
===From a connected handset===
OK -> Settings -> System Settings -> Base Reset
You'll need to know the PIN (default is 0000)
===From the actual base station===
# Unplug the power
# Press and hold the Connect button
# Whilst holding, plug in the power
# Wait until all three lights on the base station are showing as solid green
# Release the connect button
# Wait a further 5 minutes
# Then, reboot the base station by unplugging it from power and plugging it back in
==Firewall & Security==
| |||