12,270
edits
VoIP Phones - Yealink DECT: Difference between revisions
m
→Handset Assignmnent
mNo edit summary |
|||
| (15 intermediate revisions by the same user not shown) | |||
|
<indicator name="VoIPConfiguring">[[File:menu-voip.svg|link=:Category:VoIP Phones|30px|Back up to the VoIP Configuring page]]</indicator>
__NOTOC__
[[Image:W53P-1.png|thumb|Yealink
= Configuring Yealink DECT phone for AAISP =
Relevant to: '''Yealink W60B'''
!Password:
| admin
|contact us
|-
!PIN:
| 0000
|contact us
|}
The PIN is used to register handsets to the base station, and for the handset to access settings from the base station.
= IP address =
|600
|}
Repeat this for any other accounts you want to add.
===Check the SIP registration status:===
You should the the account Status as 'Registered'
===Handset Assignmnent===▼
[[File:Yealink W53P Hanset Assignment.png|thumb|Handset Assignment]]
Here you can assign which of your (up to) 8 SIP accounts are to ring which of your (up to) 8 handsets!▼
▲Here you can assign which of your (up to) 8 SIP accounts are to ring which of your (up to) 8 handsets! You can also make up to 8 calls at once, so a single base station can support a small office of people.
Account -> Number Assignment
===Other optonal settings===
Features -> General Information -> Call Waiting --> set to Disabled
Features -> General Information -> Number Of Active Handsets --> Set to 8 (if you have more than 4 handsets)
Features -> General Information -> Fwd International --> set to Disable (no need to allow forwarding to international numbers)
Features -> Phone Lock --> Add 999 to the list of emergency numbers
Settings -> Time&Date -> Time Zone --> 0 GMT
Settings -> Time&Date -> Primary Server --> time.aa.net.uk
Settings -> Time&Date -> Date Format --> YYYY-MM-DD
Settings -> Tones --> Set to Great Britian
Account -> Handset Name --> Give a name to each handset, will be displayed on their screen
Say you have an incoming call that you've answered, and you want to transfer it to someone else and introdice the caller as you go...
* '''Answer''' the incoming call, and find out who they want to be transferred to
*Press the '''TRAN''' button
**At this point the caller is put on hold
*'''Enter in the extension number''' or full number of who you want to transfer the call to
*Press the '''Green dial''' button
**At this point you will be ringing the third party
**If no answer, then you can press the button under '''End''' to go back to the
**At this point you can also Blind transfer the call, by pressing the button under '''Transfer'''
*Once answered, you can introduce the original caller and press the button under '''Transfer'''
==DND - Do not disturb==
You can enable/disable DND via the handset for each of the SIP accounts allocated to the Yealink handset:
OK --> Call Features (orange) --> Do Not Disturb
==Factory reset the Yealink DECT Base Station==
There are a few ways to factory reset the Yealink base station:
===From web ui===
Settings -> Upgrade --> Reset
===From a connected handset===
OK -> Settings -> System Settings -> Base Reset
You'll need to know the PIN (default is 0000)
===From the actual base station===
# Unplug the power
# Press and hold the Connect button
# Whilst holding, plug in the power
# Wait until all three lights on the base station are showing as solid green
# Release the connect button
# Wait a further 5 minutes
# Then, reboot the base station by unplugging it from power and plugging it back in
=Registering an additional Handset=
# Power up handset
# Press the button under 'Reg'
# Hold the button on the Base for 3 seconds
# Handset should then initialise
# Go to the Base station UI and set up the new account:
# Account - Number Assignment - or set up a new account:
## Account - Set Account2 --> Fill in details
## Account - Handset name --> Set the name
==Firewall & Security==
| |||