12,270
edits
This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!
(13 intermediate revisions by the same user not shown) | |||
= Configuring Yealink DECT phone for AAISP =
Relevant to: '''Yealink W60B, W70B, W73P, W53P and other base stations'''
The Yealink W60B/W70B is a DECT base station aimed at home as well as small and medium-sized businesses. Its main specifications are:
|contact us
|}
The PIN is used to register handsets to the base station, and for the handset to access settings from the base station. When a Base and a handset are supplied together in a single box, then the handset should already be registered to the base station. You can use these steps to register additional handsets though:
By default the Yealink base unit picks up an IP address using DHCP. You can find the IP address from the Handset as follows: ▼
# Press 'Ok' on the handset and 'Ok' on 'Status'▼
# Select 'Base' and press 'Ok'▼
# Under IPv4 you will see the IP address e.g. 192.168.1.3 (different for each user).▼
# Enter that IP in the address bar of your Web browser.▼
# Login with admin credentials. (default is user:admin password:admin).▼
=Registering an additional Handset=
# Power up handset
# Press the button under 'Reg'
# Hold the 'Radio' button on the Base for 3 seconds
# Handset should then initialise
# Go to the Base station UI and set up the new account:
<gallery widths=200px heights=200px mode="nolines">
File:
File:
File:Handsetreg2.jpg|Press Register Handset.
File:
</gallery>
= Find the IP address of the Base station & login to setup web pages. =
▲By default the Yealink base unit picks up an IP address using DHCP. You can find the IP address from the Handset as follows:
▲# Press 'Ok' on the handset and 'Ok' on 'Status'
▲# Select 'Base' and press 'Ok'
▲# Under IPv4 you will see the IP address e.g. 192.168.1.3 (different for each user).
▲# Enter that IP in the address bar of your Web browser.
▲# Login with admin credentials. (default is user:admin password:admin).
<gallery widths=200px heights=200px mode="nolines">
File:Handsetstatus.jpg|3.1 Press Ok on the handset and Ok on Status
File:Hansetbase.jpg|3.2 Select Base and press Ok
File:Handsetipadd.jpg|3.3 Under IPv4 you will see the IP address.
</gallery>
Status -> Handset & VoIP
You should the the account Status as 'Registered'
<gallery widths=300px heights=300px mode="nolines" caption="Screenshot of Account registration page">
Yealink_W53P_SIP_Config.png|VoIP Account settings▼
</gallery>
===Handset Assignment===
You have the flexibility to decide which VoIP account should ring which handset, and also which account the handsets use to make their outgoing calls.
<gallery mode="packed" widths=250px heights=250px mode="nolines" caption="Screenshots of number assignment page">
▲Yealink_W53P_SIP_Config.png|VoIP Account settings
Yealink W53P Hanset Assignment.png|Number Assignment
Yealink-4handsets1number.png|Four Handsets sharing one VoIP Account
</gallery>
|
edits