12,270
edits
VoIP Phones - Yealink DECT: Difference between revisions
m
→Handset Assignment
m (→IP address) |
|||
| (10 intermediate revisions by the same user not shown) | |||
|
= Configuring Yealink DECT phone for AAISP =
Relevant to: '''Yealink W60B, W70B, W73P, W53P and other base stations'''
The Yealink W60B/W70B is a DECT base station aimed at home as well as small and medium-sized businesses. Its main specifications are:
|contact us
|}
The PIN is used to register handsets to the base station, and for the handset to access settings from the base station. When a Base and a handset are supplied together in a single box, then the handset should already be registered to the base station. You can use these steps to register additional handsets though:
=Registering an additional Handset=▼
# Power up handset▼
# Press the button under 'Reg'▼
# Hold the 'Radio' button on the Base for 3 seconds▼
# Handset should then initialise▼
# Go to the Base station UI and set up the new account:▼
# Account - Number Assignment - or set up a new account:▼
## Account - Set Account2 --> Fill in details▼
## Account - Handset name --> Set the name▼
<gallery widths=200px heights=200px mode="nolines">▼
</gallery>▼
= Find the IP address of the Base station & login to setup web pages. =
By default the Yealink base unit picks up an IP address using DHCP. You can find the IP address from the Handset as follows:
File:Hansetbase.jpg|3.2 Select Base and press Ok
File:Handsetipadd.jpg|3.3 Under IPv4 you will see the IP address.
▲</gallery>
▲=Registering an additional Handset=
▲# Power up handset
▲# Press the button under 'Reg'
▲# Hold the button on the Base for 3 seconds
▲# Handset should then initialise
▲# Go to the Base station UI and set up the new account:
▲# Account - Number Assignment - or set up a new account:
▲## Account - Set Account2 --> Fill in details
▲## Account - Handset name --> Set the name
▲<gallery widths=200px heights=200px mode="nolines">
▲File:W73pbase.jpg|2.1.Radio Button on Base Unit
▲File:Handsetsettings.jpg|2.4. Scroll to Settings & press Ok.
▲File:Handsetreg.jpg|2.5. Arrow down to 6.Registration the press Ok.
▲File:Handsetreg2.jpg|2.6. Press Register Handset.
</gallery>
Status -> Handset & VoIP
You should the the account Status as 'Registered'
<gallery widths=300px heights=300px mode="nolines" caption="Screenshot of Account registration page">
Yealink_W53P_SIP_Config.png|VoIP Account settings▼
</gallery>
===Handset Assignment===
You have the flexibility to decide which VoIP account should ring which handset, and also which account the handsets use to make their outgoing calls.
<gallery mode="packed" widths=250px heights=250px mode="nolines" caption="Screenshots of number assignment page">
▲Yealink_W53P_SIP_Config.png|VoIP Account settings
Yealink W53P Hanset Assignment.png|Number Assignment
Yealink-4handsets1number.png|Four Handsets sharing one VoIP Account
</gallery>
| |||