12,270
edits
VoIP Phones - FritzBox: Difference between revisions
m
no edit summary
mNo edit summary |
mNo edit summary |
||
|
Some notes here for the fritzbox 7530: https://forums.thinkbroadband.com/voip/t/4749882-re-aa-voip-with-fritzbox-7530.html
I have a FB7590 on FritzOS 7.57 with A&A VoIP, all works fine.
Settings as follows:
Under "Telephony -> Telephone Numbers" you will need an entry for A&A, which should look like:
Status Telephone Number Provider Preselection
(green dot) 01268xxxxxx voiceless.aa.net.uk* *123#
I obscured our phone number, under "Status" you should see a green dot if successfully registered, the *123# is put in there by the Fritzbox, no need to set that up yourself.
There is an "edit" and "delete" button to the right. Once you click "edit" you see another page "Edit Telephone Number". Here I have got:
Under Account Information
Use internet telephone number checked
Telephony provider Other provider
Telephone number for registration* your number in international format, I have +441268xxxxxx
Internal telephone number in the FRITZ!Box** not really important, I have 01268xxxxx
Display name (leave blank)
Under Account Information
Username, Authentication name, Password as supplied by A&A
Registrar voiceless.aa.net.uk
Proxy server (leave blank)
STUN server (leave blank)
Under Telephone Number Format:
Telephone Number Format
Precede the number dialed with these prefix numerals:
Country code select "With prefix (0044)"
Area code select "Without prefix (1268)
Relay outgoing emergency calls without prefixes checked
Relay special rate numbers without prefixes checked
the rest in this section is blank/unchecked
Under "Additional Settings for the Telephone Number":
*DTMF transmission RTP or Inband
*Suppress outgoing Caller ID (CLIR) CLIR via display name
*Caller ID disabled
*Provider supports G.726 in accordance with RFC 3551 unchecked
*Provider supports call-back on busy (CCBS) in accordance with RFC 4235 unchecked
*Provider supports forwarding of calls during the calling phase unchecked
*Packet size in milliseconds in send direction 20
Under "Additional Settings for the Connection"
*Use telephone number for registration checked
*Always register via an internet connection checked
Contact internet telephony provider via
*Transport protocol only via IPv4
*The provider supports encrypted telephony via SRTP in accordance with RFC 3711 and RFC 4568 unchecked
*Media protocol RTP/AVP
*Provider supports MWI (RFC 3842) unchecked
*Provider does not support REGISTER-fetch unchecked
It may also work with some of the above configured differently, but what is shown above works for me.
{| class="wikitable"
| |||