12,270
edits
VoIP Phones - FritzBox: Difference between revisions
m
no edit summary
mNo edit summary |
mNo edit summary |
||
|
I have a FB7590 on FritzOS 7.57 with A&A VoIP, all works fine.
'''Settings as follows:'''
Under "Telephony -> Telephone Numbers" you will need an entry for A&A, which should look like:
Status Telephone Number Provider Preselection
(green dot)
I obscured our phone number, under "Status" you should see a green dot if successfully registered, the *123# is put in there by the Fritzbox, no need to set that up yourself.
There is an "edit" and "delete" button to the right. Once you click "edit" you see another page "Edit Telephone Number". Here I have got:
'''Under Account Information'''
* Use internet telephone number checked
* Telephony provider Other provider
'''Telephone number for registration'''
* your number in international format, I have +441268xxxxxx
* Internal telephone number in the FRITZ!Box** not really important, I have 01268xxxxx
* Display name (leave blank)
'''Under Account Information'''
*Username, Authentication name, Password as supplied by A&A
*Registrar voiceless.aa.net.uk
*STUN server (leave blank)
'''Under Telephone Number Format:'''
* Precede the number dialed with these prefix numerals:
* Country code select "With prefix (0044)"
* Area code select "Without prefix (1268)
* Relay outgoing emergency calls without prefixes checked
* Relay special rate numbers without prefixes checked
the rest in this section is blank/unchecked
'''Under "Additional Settings for the Telephone Number":'''
*DTMF transmission RTP or Inband
*Suppress outgoing Caller ID (CLIR) CLIR via display name
*Packet size in milliseconds in send direction 20
'''Under "Additional Settings for the Connection"'''
*Use telephone number for registration checked
*Always register via an internet connection checked
'''Contact internet telephony provider via'''
*Transport protocol only via IPv4
*The provider supports encrypted telephony via SRTP in accordance with RFC 3711 and RFC 4568 unchecked
| |||