Revision as of 10:00, 20 March 2025 (view source) Adsb (talk \| contribs) (WAN VLAN with swconfig) ← Older edit		Revision as of 10:02, 20 March 2025 (view source) Adsb (talk \| contribs) (→‎On older "swconfig" versions) Newer edit →
OpenWrt prior to version 21 had the "Network", "Switch" menu in Luci, and older switch configuration software. Some hardware is still using this older software even in version 24. * Delete any wan6 interface under "Network", "Interfaces" * If needing a WAN VLAN, go to "Network", "Switch" and you should see two VLANs defined: VLAN 1 for the LAN ports, and VLAN 2 for the WAN port. Change VLAN 2 to be numbered VLAN 911 or 101 as required. Change this VLAN on the WAN port from untagged to tagged. Save and Apply. == On new "Distributed Switch Architecture" versions ==

OpenWRT routers (view source)