editor
501
edits
OpenWRT routers: Difference between revisions
Older "swconfig" versions
(Older "swconfig" versions) Tags: Mobile edit Mobile web edit |
|||
|
* Delete any wan6 interface under "Network", "Interfaces"
* If needing a WAN VLAN, go to "Network", "Switch" and you should see two VLANs defined: VLAN 1 for the LAN ports, and VLAN 2 for the WAN port. Change VLAN 2 to be numbered VLAN 911 or 101 as required. Change this VLAN on the WAN port from untagged to tagged. Save and Apply.
* Under "Network", "Interfaces" edit the wan interface. Change the protocol to PPPoE. Device should be "eth0.2" if you're not using a VLAN, or "eth0.911" or "eth0.101" if you are. Enter your AAISP username and password. Under "Advanced settings", set "Obtain IPv6 address" to automatic, tick "Use default gateway". Under DHCP server, ignore this interface.
* Save and apply, then restart the wan interface
* The wan and wan6 interfaces should now come up online
== On new "Distributed Switch Architecture" versions ==
| |||