Revision as of 20:44, 1 June 2014 (view source) DominicBodger (talk \| contribs) No edit summary ← Older edit		Revision as of 20:50, 1 June 2014 (view source) DominicBodger (talk \| contribs) No edit summary Newer edit →
boot-start-marker boot-end-marker !▼ ! no logging buffered dot11 syslog ip source-route !▼ ! ip cef ip dhcp excluded-address <excludeyourroutingaddresses> ! # DHCP for our internal network ip dhcp pool HOME network 192.168.1.0 255.255.255.0 lease 7 ! # DHCP for our external network ip dhcp pool AAISP network <~~yournetworkbase~~yourexternalnetworkbase> 255.255.255.248 domain-name home-external dns-server 217.169.20.20 bridge irb ! # This is our ~~roting~~routing interface in the global domain, we NAT here interface GigabitEthernet0/0 description HOME-AAISP speed auto ! # This is our routing interface in the AAISP domain, you need a patch between GigabitEthernet0/0 and GigabitEthernet0/1 interface GigabitEthernet0/1 description AAISP-HOME ! ! # spanning-tree portfast gets rid of the annoying forwarding delay on PHY up interface FastEthernet1/0 no ip address ntp server 37.122.210.134 source GigabitEthernet0/0 end</nowiki> == Changing target DSL noise margin within IOS A little known trick, which I am sure will upset support! <nowiki>service internal ▲! int atm0/0/0 # Replace <num> with the desired offset in db dsl-noisemargin -<num> ▲!

Bonding with Cisco IOS (view source)