View source for ZyXEL GS1900-8

=Overview=
The GS1900-8 is a fanless 8 port managed switch.

=Configuration=

==Factory Default Admin Username/Password==
Note: If AAISP configured the switch then the credentials will be different
{|class="wikitable"
!colspan="3"|Default/Factory Password
|-
!IP: 
|colspan="2"|192.168.1.1
|-
!Username: 
|admin
|-
!Password: 
|1234
|}
https is enabled by default, albeit with a certificate that will give browser warnings

'''When you make a change to the configuration you must click Save from the top/right corner of the web interface'''

==Factory Reset==
Hold in the reset button on the front for 10 seconds, release, and all the port lights will light up and the switch will reboot.

==Accessing the switch==
*Set your computer to be on an IP in the subnet that the switch is in, eg, 192.168.1.100/255.255.255.0
*In your browser, go to http://192.168.1.1
*Login with the default credentials as above


==VLAN config==
When using with a FireBrick for bonding multiple lines we can use VLANS for each of the PPP sessions.

We'll configure the switch as:
*Port 1 - VLAN 101, for ADSL line 1
*Port 2 - VLAN 102, for ADSL line 2
*Port 3 - VLAN 103, for ADSL line 3
*Port 4 - VLAN 104, for ADSL line 4
*Port 8 is for the FireBrick

==Creating the VLANs==
*Click VLAN
**Create a new VLAN, enter in 101, then Click Next
***Drag Port01 to the Untagged area
***Drag Port08 to the tagged area
***Click Next, then click Finish
*Click Save from the top/right corner of the web interface


[[File:GS1900-VLANs.png|thumbnail|none|VLAN Port Configuration]]


This process repeats for VLAN 102, 103, 104 but you use Port02 for VLAN 102, Port03 for VLAN 103, Port04 for VLAN 104... so:

*From the front page, Click VLAN
**Create a new VLAN, enter in 102, then Click Next
***Drag Port02 to the Untagged area
***Drag Port08 to the tagged area
***Click Next, then click Finish
*Click Save from the top/right corner of the web interface

*From the front page, Click VLAN
**Create a new VLAN, enter in 103, then Click Next
***Drag Port03 to the Untagged area
***Drag Port08 to the tagged area
***Click Next, then click Finish
*Click Save from the top/right corner of the web interface

*From the front page, Click VLAN
**Create a new VLAN, enter in 104, then Click Next
***Drag Port04 to the Untagged area
***Drag Port08 to the tagged area
***Click Next, then click Finish
*Click Save from the top/right corner of the web interface

==Change admin password==
*From the front page, click the settings/Cog icon on the left
*Click Management, then Users
**Click the Modify icon next to the admin user
**Enter in your new password and click Apply.
*Click Save from the top/right corner of the web interface

==Further, Optional settings==

Optionally, if you wish, you can name the switch:
*From the front page, click the settings/Cog icon on the left
**Click System, then Information
**Enter in Name, Location, Contact details as you wish
**Click Apply
*Click Save from the top/right corner of the web interface

Optionally, If you wish, you can set Names for your VLANs:
*From the front page, click the settings/Cog icon on the left
*Click VLAN, then VLAN
**Click the modify icon to the right of VLAN 101
**Change the name from VLAN0101 to, say, PPP101
**Click Apply
*Repeat for the other VLANs
*Click Save from the top/right corner of the web interface

Optionally, if you wish, you can name the Ethernet ports
*From the front page, click the settings/Cog icon on the left
*Click Port, then Port
**Tick the bot next to Port 1, Click Edit
**Set the name to, say, Modem1
*Repat the above for ports 2, 3, and 4. For port 8, name that FireBrick.
*Click Save from the top/right corner of the web interface