IPv6 Routers: Difference between revisions
Content deleted Content added
| Line 31: | Line 31: | ||
==Firmware Versions== |
==Firmware Versions== |
||
Version 8.4.4. |
Version 8.4.4.1 is the factory default (as of November 2011) |
||
Version 8.4.7.0 is IPv6 enabled |
Version 8.4.7.0 is IPv6 enabled |
||
Upgrading from 8.4.4.1 is arranged by AAISP via the TR-069 CPE WAN Management protocol. This involves installing the "isp.def" as needed to persuade the router to connect to AAISP's TR-069 servers and asking AAISP to request the upgrade. |
|||
===Admin Settings=== |
===Admin Settings=== |
||
When configured by A&A, the default username from the LAN side is: Administrator and from the WAN: aaisp. |
When configured by A&A, the default username from the LAN side is: Administrator and from the WAN: aaisp. |
||
The password will be printed on the card on the base of the router, and also seen on the control pages. |
The password will be printed on the card on the base of the router, and also seen on the control pages. |
||
===Setting up Routed Config=== |
|||
Use the configuration-wizard (Firefox seems to work best) and choose ADSL(Expert). |
|||
TODO: Describe where to find this. |
|||
===Adding Static-routes=== |
|||
TODO: Fill this out, Apparently done over the telnet interface? |
|||
===Really disabling the firewall=== |
===Really disabling the firewall=== |
||