Billion 8800NL R2: Difference between revisions

(12 intermediate revisions by 2 users not shown)

Line 14:

|192.168.1.254

|}

==Chipset==

Broadcom 63381

==Factory Reset==

Line 19:

Line 22:

==Firmware==

~~The~~ ~~latest~~ firmware can be ~~downloaded~~ ~~from~~:

Various releases of firmware can be found at the:

[http://www.billion.uk.com/esupport/index.php?/Knowledgebase/~~Article~~/~~View/400~~/119~~/latest-bipac-8800nl-r2-firmware-252d1~~ Bipac 8800NL R2 ~~Firmware~~ ~~2.52.d1~~]

[http://www.billion.uk.com/esupport/index.php?/Knowledgebase/List/Index/119 Bipac 8800NL R2 Support site]

==Bridge Setup==

How to setup the 8800NL R2 as a Bridge:

*Configuration -> WAN -> WAN Service

**Edit ptm0.1

**Type: Bridging

**Description: br_0_1_0.101

**802.1P Priority: 0

**802.1Q VLAN ID: 101

**Click Apply

*Configuration -> LAN -> Interface Grouping

**Groups Isolation: Enable

**Click Apply

**Click Add

**Group Name: Bridge

**Grouped WAN Interfaces: ptm0.1

**Grouped LAN Interfaces: P5/EWAN

**Click Apply

*Configuration -> Wireless -> Basic

**Wireless: Disable

**Click Apply

==WiFi Client Limit of 16==

Line 34:

Line 59:

We're not yet sure if the 8800NL supports an MTU of 1508, but we have asked (February 2017)

One of our customers reports that the 8800NL R2 doesn't support Baby Jumbo frames when tested in bridge mode using firmware 2.52.d1 (March 2017)

==PPP session ID cache bug 'packet accelerator'==

One problem we see with Broadcom based routers is that they have an

One problem we see with Broadcom-based routers is that they have an

internal feature which is a 'packet accelerator' which causes problems when a PPPoE session finishes and a new one starts.

Ethernet frames containing IP packets with the same source and destination IP and port

Line 51:

Line 78:

We're not yet sure if the 8800NL has this 'feature' enabled, but we have asked (February 2017)

One of our customers also reports that the 8800NL R2 doesn't appear to have this bug (March 2017)