Billion 8800NL R2: Difference between revisions
Content deleted Content added
CrazyTeeka (talk | contribs) mNo edit summary |
→PPP session ID cache bug 'packet accelerator': clean up, typos fixed: Broadcom based → Broadcom-based |
||
| (4 intermediate revisions by 2 users not shown) | |||
| Line 14: | Line 14: | ||
|192.168.1.254 |
|192.168.1.254 |
||
|} |
|} |
||
==Chipset== |
|||
Broadcom 63381 |
|||
==Factory Reset== |
==Factory Reset== |
||
| Line 19: | Line 22: | ||
==Firmware== |
==Firmware== |
||
Various releases of firmware can be found at the: |
|||
[http://www.billion.uk.com/esupport/index.php?/Knowledgebase/ |
[http://www.billion.uk.com/esupport/index.php?/Knowledgebase/List/Index/119 Bipac 8800NL R2 Support site] |
||
==Bridge Setup== |
==Bridge Setup== |
||
| Line 42: | Line 46: | ||
**Wireless: Disable |
**Wireless: Disable |
||
**Click Apply |
**Click Apply |
||
==Sync Rate Capping== |
|||
The 8800NL allows you to adjust/lower the Sync Rate (not persistent). In this example we use 40Mbit down, 10Mbit up, then the third number is the total of the first two numbers (eg. 50000). |
|||
*telnet 192.168.1.254 |
|||
*admin |
|||
*admin |
|||
*adsl configure --maxDataRate 40000 10000 50000 |
|||
==WiFi Client Limit of 16== |
==WiFi Client Limit of 16== |
||
| Line 66: | Line 63: | ||
==PPP session ID cache bug 'packet accelerator'== |
==PPP session ID cache bug 'packet accelerator'== |
||
One problem we see with Broadcom |
One problem we see with Broadcom-based routers is that they have an |
||
internal feature which is a 'packet accelerator' which causes problems when a PPPoE session finishes and a new one starts. |
internal feature which is a 'packet accelerator' which causes problems when a PPPoE session finishes and a new one starts. |
||
Ethernet frames containing IP packets with the same source and destination IP and port |
Ethernet frames containing IP packets with the same source and destination IP and port |
||