Setting up the XClaim Xi-2/3: Difference between revisions
Content deleted Content added
No edit summary |
→Setting up the Harmony App: clean up, typos fixed: , → , |
||
| (2 intermediate revisions by one other user not shown) | |||
| Line 14: | Line 14: | ||
[[File:Harmony_admin_pw.png|200px|center]] |
[[File:Harmony_admin_pw.png|200px|center]] |
||
3. Set your SSID |
3. Set your SSID, or skip this step. |
||
4. Hit 'Finish'. On the following screen, hit 'search for Access Points'. ''This step can be slow, if it hangs when searching, close the app and then open it again''. Once done, you should see your new access point in the list. Click it. |
4. Hit 'Finish'. On the following screen, hit 'search for Access Points'. ''This step can be slow, if it hangs when searching, close the app and then open it again''. Once done, you should see your new access point in the list. Click it. |
||
| Line 33: | Line 33: | ||
3. Once logged in you can modify the settings for the XClaim access point to your liking. |
3. Once logged in you can modify the settings for the XClaim access point to your liking. |
||
==Factory Default Admin Username/Password== |
|||
The username and password below is only needed if you wish to configure individual Access Points manually. If you wish to use the Xclaim Cloud Manager then you don't need to use these credentials as the Cloud Manager will take over the configuration. |
|||
{|class="wikitable" |
|||
!colspan="3"|Default/Factory Password |
|||
|- |
|||
!IP Address: |
|||
|colspan="2"|192.168.0.1 or DHCP from your LAN |
|||
|- |
|||
!Web Interface Username: |
|||
|xclaim-mfg |
|||
|- |
|||
!Web Interface Password: |
|||
|mfg-admin12 |
|||
|} |
|||
==Factory Reset== |
|||
Hole in the reset button for 8 seconds, release and it will restart |
|||
[[Category:Other Hardware]] |
|||