252
edits
This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!
m (→Configuring your Dialer interfaces: typo) |
|||
(15 intermediate revisions by 3 users not shown) | |||
<indicator name="Front">[[File:Menu-bonding.svg|link=:Category:Bonding|30px|Back up to the Bonding Page]]</indicator>
[[Category:3rd Party Routers|Cisco]]
[[Category:Bonding Configuration|Cisco]]
After a few nights of meddling with my configuration, the following setup is working well for me. I would like to share it with the community.
dialer pool 1
ppp chap hostname <yourAAISPuser>@a.1
ppp chap password 0 <
no cdp enable
!
ip address <fromyourblock> <yoursubnet></nowiki>
== Upstream load balancing using CEF ==
<nowiki>ip cef
!
Caveats:
* Routing between global and a vrf in IOS is unpleasant. This configuration relies on a use of a physical [[Ethernet]] patch between GigabitEthernet0/0 and GigabitEthernet0/1 for routing traffic between the global and AAISP
<nowiki>version 15.1
service timestamps log datetime msec
no service password-encryption
!
hostname <yourhostname>
end</nowiki>
== Changing target DSL noise margin within IOS ==
A little known trick,
<nowiki>service internal
!
int
# Replace <num> with the desired offset in db
dsl-noisemargin -<num>
|
edits