Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

FireBrick Bonding more than 3 lines: Difference between revisions

← Older edit
Content deleted Content added
Reedy (talk | contribs)
editor
706 edits
m clean up, typos fixed: eg. → e.g. (2), a interface → an interface
AA-Andrew (talk | contribs)
autoreview, Bureaucrats, editor, Interface administrators, reviewer, Administrators
12,619 edits
 
(11 intermediate revisions by 4 users not shown)
Line 1: Line 1:
[[File:2700-small.png|link=:Category:FireBrick]]
<indicator name="Front">[[File:Menu-bonding.svg|link=:Category:Bonding|30px|Back up to the Bonding Page]]</indicator>


=Overview=
=Overview=
The FireBrick 2500/2700 has 4 ethernet ports, typically one port will be for the LAN connection (for example - to the main office switch), and the rest for connections to the ADSL/FTTC modems.
The FireBrick 2500/2700 have 4 ethernet ports, the 2900 has 4 plus an SFP which can be used with a Copper of fibre SFP to give an additional port. Typically one port will be for the LAN connection (for example - to the main office switch), and the rest for connections to the ADSL/FTTC modems.


As there are 4 ports are we restricted to only bonding up to 3 ADSL/FTTC lines? No.
As there are 4 ports are we restricted to only bonding up to 3 ADSL/FTTC lines? No.
Line 17: Line 17:


The switch would be set up for 4 (or more) separate VLANs on the appropriate ports, and on the FireBrick, the <ppp .../> config would have VLAN="n".
The switch would be set up for 4 (or more) separate VLANs on the appropriate ports, and on the FireBrick, the <ppp .../> config would have VLAN="n".



=VLAN Switch Config=
=VLAN Switch Config=
Instructions on using a ZyXEL GS1900-8 switch: [[ZyXEL GS1900-8]]
⚫
Here are some notes on setting up a HP ProCurve 1810G-8:

⚫
Below are some notes on setting up a HP ProCurve 1810G-8:


The HP ProCurve 1810G-8 (J9449A) is a nice little 8 port managed switch. No fans and similar in size to a FireBrick.
The HP ProCurve 1810G-8 (J9449A) is a nice little 8 port managed switch. No fans and similar in size to a FireBrick.
Line 29: Line 30:


*Default IP is "192.168.2.10"
*Default IP is "192.168.2.10"
*Default Password is blank
*Default username: admin
*Default password: 1234


==Save Config==
==Save Config==
Line 70: Line 72:


[[File:1810G-8-VLAN1.png|border|500px]]
[[File:1810G-8-VLAN1.png|border|500px]]

On some switches you may need to set the PVID accordingly - ie Port 1 = PVID 101, Port 2 = PVID 102 etc... This was needed on a PoE variant of a switch, but not on the non-PoE variant.


*SAVE CONFIG - otherwise you will learn the hard way
*SAVE CONFIG - otherwise you will learn the hard way
Line 78: Line 82:
Set the gateway to the FireBrick, then the switch can access things like time server, syslog server etc...
Set the gateway to the FireBrick, then the switch can access things like time server, syslog server etc...



⚫
[[Category:Bonding]]
[[Category:FireBrick]]
[[Category:FireBrick|Bonding]]
⚫
[[Category:Bonding Configuration]]
Retrieved from "http://support.aa.net.uk/FireBrick_Bonding_more_than_3_lines"