Stopping Open DNS - FireBrick 2700: Difference between revisions
m (Change URL from clueless to control) |
m (→Testing Access) |
||
| Line 16: | Line 16: | ||
The web interface of the FireBrick can list what services are open, go to |
The web interface of the FireBrick can list what services are open, go to |
||
Diagnostics -> Access Check |
Diagnostics -> Access Check |
||
Enter |
Enter a Source IP of an IP on the Internet. |
||
The FireBrick will then list all the services open to that IP address, e.g.: |
The FireBrick will then list all the services open to that IP address, e.g.: |
||
Latest revision as of 08:01, 31 October 2021
On a FireBrick 2700 the DNS service defaults to local-only - this prevents access to the FireBrick DNS resolver from the WAN by default.
The setting for this is found in the Web config editor at:
Config -> Edit -> Setup -> General system services -> DNS service settings -> local-only
- Then re-test from the Control Pages: https://control.aa.net.uk/dnsresolvers.cgi
Testing Access
The web interface of the FireBrick can list what services are open, go to
Diagnostics -> Access Check
Enter a Source IP of an IP on the Internet.
The FireBrick will then list all the services open to that IP address, e.g.:
DNS resolver access:- This address is not on a local Ethernet subnet and so not allowed access.