Router - ZyXEL P660R-D1: Difference between revisions

(24 intermediate revisions by 2 users not shown)

Line 1:

<indicator name="Front">[[File:Menu-B10D.svg|link=:Category:AA Routers|30px|Back up to the A&A Routers Page]]</indicator>

[[File:P660rd1.png]]

Line 47:

Line 48:

!Password:

|1234

|-

!IP:

|192.186.1.1

|-

!HTTP port:

Line 65:

Line 69:

|}

Factory reset:

Hold in the RESET button for five seconds and then release it, then log in using default IP and password as above

[[File:ZyXEL-660R-D1-Login.png|none|200px|frame|Login Screen]]

Line 72:

Line 78:

This will cover BT, TT, BE lines.

[[File:BT-Zyxel.png|300px]]

[[File:BT-Zyxel.png|300px|PPPoA Settings screen|PPPoA Settings screen]]

==Bridge config==

Line 89:

Line 95:

ADSL modulation type: Multimode

[[File:Zyxel-bridge.png|300px]]

[[File:Zyxel-bridge.png|300px|border|Config page]]

== Security Advisories ==

ZyXEL have a page with their Security Advisories: https://www.zyxel.com/support/security_advisories.shtml

==Netbios Filter==

Line 95:

Line 104:

==Closing Open DNS==

*See: [[~~Stopping_Open_DNS_~~-~~_ZyXEL_P66R~~-D1]]

*See: [[Stopping Open DNS - ZyXEL P66R-D1]]

⚫

[[Category:~~Router~~]]

==Closing WAN HTTP==

Line 113:

Line 121:

**Use this to only allow access from a specific IP. This applies to the LAN side and the WAN side.

Changing Web Interface port from the Control Pages

===Changing Web Interface port from the Control Pages===

You are able to change the port from the Control Pages. Log in, click on the Line, and then the Router Settings button.

From this page, you can pick which port you'd like it to be set to, and the system will attempt to change it for you.

[[File:Clueless-zyxelport.png]]

[[File:Clueless-zyxelport.png|none|frame|Web Interface setting on the Control Page]]

===Changing ~~HTTP~~ ~~Settings~~ via the Web Interface===

===Changing Web Interface port via the Web Interface===

The setting is found on the web interface under:

The port can be changed from within the routers's web interface. The setting is found on the web interface under:

Advanced -> Remote MGMT -> WWW

Line 128:

Line 136:

[[File:ZyXEL-660R-D1-HTTP.png|none|frame|HTTP Options screen. Here you can enable/disable LAN access and change the port]]

===Changing ~~HTTP~~ ~~Setting~~ via Telnet===

===Changing Web Interface port via Telnet===

View the current access settings (for all services)

Line 146:

Line 154:

sys save

==ZyXEL ~~HTTP~~ ~~Port~~ on configured routers==

==ZyXEL Web Interface port on configured routers==

From January 2013, ZyXELs will be have a random port number for the web interface. This will be printed on plastic card supplied with the router. The port number can also be seen from the

Control pages by clicking on the Line.

[[File:ZyXEL-660R-D1-HTTPPort.png|none|frame|Port number as on Control Pages]]

The port can also be changed from the Control Pages, see above for details.

=Old ZyXEL Prestige 660R-61C Router=

Here are some notes on the legacy (very old) Prestige 660R-61C ZyXEL router:

The HTTP port on some C1 routers can be changed from the web interface (Under Advanced, Remote Management) ot via telnet (Menu 24 then 11)

[[File:660c-remotemanagement.png|none|frame|Remote Management Options on Older ZyXEL Router]]

⚫

[[Category:AA Routers|ZyXEL]]