Revision as of 07:07, 23 December 2024 (view source) Adsb (talk \| contribs) m (PPPoE and PPPoA) Tags: Mobile edit Mobile web edit ← Older edit		Revision as of 07:09, 23 December 2024 (view source) Adsb (talk \| contribs) m (PPPoE) Tags: Mobile edit Mobile web edit Newer edit →
Then click on the WAN interface name (i.e. click on "WAN" if you have called it like that) and enable it. For the IPv4 configuration type select "~~PPoE~~PPPoE". And for the [[IPv6 Configuration]] Type select "DHCP6". Ensure that "Use IPv4 connectivity as parent interface" is selected. In the ~~PPoE~~PPPoE configuration section enter your username and password (as given by A&A) and ensure that "dial on demand" is validated and that the idle timeout is set to 0. You should get a configuration screen similar to this: Finally, click on the save button. ''Note: In previous versions of pfSense (2.1.0 and 2.1.1) this was a bit buggy and pfSense was getting mixed up in the ~~PPoE~~PPPoE interface assignment. So you often had to manually define the ~~PPoE~~PPPoE interface by creating it in the PPP tab of the "Interfaces -> (assign)" page. But this seems to work reasonably well now.'' === Updating the LAN settings ===

Router - PFSense (view source)