Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

DGA0122 DHCP Public IPs: Difference between revisions

Content deleted Content added
Adsb (talk | contribs)
editor
520 edits
Initial revision
 
AA-Andrew (talk | contribs)
autoreview, Bureaucrats, editor, Interface administrators, reviewer, Administrators
12,652 edits
mNo edit summary
 
Line 5: Line 5:
=Unable to set static DHCP leases when using public IPs=
=Unable to set static DHCP leases when using public IPs=


If you want to set a DHCP static lease to a public IP then you will get the error 'Cannot use an address in this address range' and will be unable to set it.
* If you want to set a DHCP static lease to a public IP then you will get the error 'Cannot use an address in this address range' and will be unable to set it.
⚫
*It seems the web interface only allows RFC1918 addresses to be used as the 'Local IPv4 Address'
*You could just set a static IP on the computer, but there is a bit of a 'hack' via the CLI to configure a static DHCP allocations if this is what you're after (but you're on your own from this point!)


⚫
It seems the web interface only allows RFC1918 addresses to be used as the 'Local IPv4 Address'
=Hacking=
=Hacking=


Retrieved from "http://support.aa.net.uk/DGA0122_DHCP_Public_IPs"