VoIP Phones - Yealink DECT: Difference between revisions

(43 intermediate revisions by 2 users not shown)

Line 1:

<indicator name="VoIPConfiguring">[[File:menu-voip.svg|link=:Category:VoIP Phones|30px|Back up to the VoIP Configuring page]]</indicator>

__NOTOC__

[[Image:W53P-1.png|thumb|Yealink W60B base and handset]]

= Configuring Yealink DECT phone for AAISP =

Relevant to: '''Yealink W60B, W70B and other base stations'''

Relevant to: '''Yealink W60B, W70B, W73P, W53P and other base stations'''

The Yealink W60B is a DECT base station aimed at small and medium-sized businesses~~, is perfectly suitable for home use too~~. Its main specifications are:

The Yealink W60B/W70B is a DECT base station aimed at home as well as small and medium-sized businesses. Its main specifications are:

*Up to 8 handsets

*Up to 8 SIP accounts

Line 13:

*IPv4 and IPv6

*PoE or Mains plug for power

*Transfer button (allows ~~assistited~~ or blind transfers to other SIP extensions/external numbers)

*Transfer button (allows assisted or blind transfers to other SIP extensions/external numbers)

*Docs/firmware from Yealink: https://support.yealink.com/en/portal/docList?archiveType=document&productCode=b0040cca269c2a01

*[https://www.yealink.com/upfiles/products/datasheet/Yealink-W60B-Datasheet.pdf Datasheet]

Line 39:

Line 40:

|contact us

|}

The PIN is used to register handsets to the base station, and for the handset to access settings from the base station.

The PIN is used to register handsets to the base station, and for the handset to access settings from the base station. When a Base and a handset are supplied together in a single box, then the handset should already be registered to the base station. You can use these steps to register additional handsets though:

= IP address =

⚫

By default the Yealink base unit picks up an IP address using DHCP. You can find the IP address from the Handset:

Press OK –> Select the ‘i’ icon (Status) -> select ‘Base’ -> the IP will be shown

=Registering an additional Handset=

# Power up handset

# Press the button under 'Reg'

# Hold the button on the Base for 3 seconds

# Hold the 'Radio' button on the Base for 3 seconds

# Handset should then initialise

# Go to the Base station UI and set up the new account:

Line 56:

Line 53:

## Account - Handset name --> Set the name

File:Handsetsettings.jpg|Scroll to Settings & press Ok.

File:Handsetreg.jpg|Arrow down to 6.Registration the press Ok.

File:Handsetreg2.jpg|Press Register Handset.

File:W73pbase.jpg|Radio Button on Base Unit

</gallery>

= Find the IP address of the Base station & login to setup web pages. =

⚫

By default the Yealink base unit picks up an IP address using DHCP. You can find the IP address from the Handset as follows:

# Press 'Ok' on the handset and 'Ok' on 'Status'

# Select 'Base' and press 'Ok'

# Under IPv4 you will see the IP address e.g. 192.168.1.3 (different for each user).

# Enter that IP in the address bar of your Web browser.

# Login with admin credentials. (default is user:admin password:admin).

File:Handsetstatus.jpg|3.1 Press Ok on the handset and Ok on Status

File:Hansetbase.jpg|3.2 Select Base and press Ok

File:Handsetipadd.jpg|3.3 Under IPv4 you will see the IP address.

</gallery>

=Yealink and Voiceless Settings=

⚫

~~[[File:~~Yealink_W53P_SIP_Config.png|~~thumb|click to~~ ~~view~~ settings]]

On the web interface, go to:

Account ->

# Select 'Account' & 'Register' tab & enter you VoIP number (+44...) in 'Register Name' & 'Username'.

# Enter SIP password from your control page into 'Password' box.

# Set 'Server Host' to 'voiceless.aa.net.uk'.

# Click 'Confirm'.

# If correct then you should see Register Status = 'Registered'.

# If you have more than one number you can select 'Account1' drop down and add further numbers.

{| class="wikitable"

Line 98:

Line 122:

===Check the SIP registration status:===

Go to:

Status -> ~~Yealink_W53P_SIP_Config.png~~

Status -> Handset & VoIP

You should the the account Status as 'Registered'

⚫

~~[[File:~~Yealink W53P ~~Hanset~~ Assignment.png|~~thumb|Handset~~ Assignment]]

⚫

Yealink_W53P_SIP_Config.png|VoIP Account settings

</gallery>

===Handset Assignment===

Here you can assign which of your (up to) 8 SIP accounts are to ring which of your (up to) 8 handsets! You can also make up to 8 calls at once, so a single base station can support a small office of people.

Account -> Number ~~Assignment~~

# From the 'Account' tab select 'Number assignment' from menu.

# Here you can select which handsets are connected to your numbers for outgoing and incoming calls.

You have the flexibility to decide which VoIP account should ring which handset, and also which account the handsets use to make their outgoing calls.

⚫

Yealink W53P Handset Assignment.png|Number Assignment

Yealink-4handsets1number.png|Four Handsets sharing one VoIP Account

</gallery>

⚫

~~[[File:~~Yealink-ghost-call.png|thumb|To disable Ghost calls]]

===Other optional settings===

Line 116:

Line 148:

Features -> General Information -> Accept SIP Trust Server Only --> Set to Enabled (This stops direct 'ghost calls' from the internet, and only allows calls from the registered SIP server)

⚫

Yealink-ghost-call.png|thumb|To disable Ghost calls

</gallery>

Features -> General Information -> Call Waiting --> set to Disabled

Line 155:

Line 190:

OK --> Call Features (orange) --> Do Not Disturb

⚫

==Factory reset the Yealink DECT Base Station==

⚫

=Registering an additional Handset=

⚫

# Power up handset

⚫

# Press the button under 'Reg'

⚫

# Hold the button on the Base for 3 seconds

⚫

# Handset should then initialise

⚫

# Go to the Base station UI and set up the new account:

⚫

# Account - Number Assignment - or set up a new account:

⚫

## Account - Set Account2 --> Fill in details

⚫

## Account - Handset name --> Set the name

⚫

=Factory reset the Yealink DECT Base Station=

If you have lost the password you will have to factory reset the base station, and the default username and password will then work, and you'll need to configure the unit again.

There are a few ways to factory reset the Yealink base station:

===From web ui===

If you know the password!

Settings -> Upgrade --> Reset

Line 173:

Line 224:

# Wait a further 5 minutes

# Then, reboot the base station by unplugging it from power and plugging it back in

⚫

=Registering an additional Handset=

⚫

# Power up handset

⚫

# Press the button under 'Reg'

⚫

# Hold the button on the Base for 3 seconds

⚫

# Handset should then initialise

⚫

# Go to the Base station UI and set up the new account:

⚫

# Account - Number Assignment - or set up a new account:

⚫

## Account - Set Account2 --> Fill in details

⚫

## Account - Handset name --> Set the name

Line 190:

Line 231:

[[Category:VoIP Phones|~~Gigaset~~ ~~N300~~]]

[[Category:VoIP Phones|Yealink DECT]]