VoIP Phones - Yealink DECT: Difference between revisions

(21 intermediate revisions by 2 users not shown)

Line 1:

<indicator name="VoIPConfiguring">[[File:menu-voip.svg|link=:Category:VoIP Phones|30px|Back up to the VoIP Configuring page]]</indicator>

__NOTOC__

[[Image:W53P-1.png|thumb|Yealink W60B base and handset]]

= Configuring Yealink DECT phone for AAISP =

Relevant to: '''Yealink W60B, W70B and other base stations'''

Relevant to: '''Yealink W60B, W70B, W73P, W53P and other base stations'''

The Yealink W60B/W70B is a DECT base station aimed at home as well as small and medium-sized businesses. Its main specifications are:

Line 14:

*PoE or Mains plug for power

*Transfer button (allows assisted or blind transfers to other SIP extensions/external numbers)

*Docs/firmware from Yealink: https://support.yealink.com/en/portal/docList?archiveType=document&productCode=b0040cca269c2a01

*[https://www.yealink.com/upfiles/products/datasheet/Yealink-W60B-Datasheet.pdf Datasheet]

Line 39:

Line 40:

|contact us

|}

The PIN is used to register handsets to the base station, and for the handset to access settings from the base station.

The PIN is used to register handsets to the base station, and for the handset to access settings from the base station. When a Base and a handset are supplied together in a single box, then the handset should already be registered to the base station. You can use these steps to register additional handsets though:

= IP address =

⚫

By default the Yealink base unit picks up an IP address using DHCP. You can find the IP address from the Handset as follows:

⚫

# Press 'Ok' on the handset and 'Ok' on 'Status'

⚫

# Select 'Base' and press 'Ok'

⚫

# Under IPv4 you will see the IP address e.g. 192.168.1.3 (different for each user).

⚫

# Enter that IP in the address bar of your Web browser.

⚫

# Login with admin credentials. (default is user:admin password:admin).

⚫

File:Yealogin.jpg|3.4 Enter that IP in the address bar of your Web browser & 3.5 Login with admin credentials. (default is user:admin password:admin).

⚫

</gallery>

=Registering an additional Handset=

# Power up handset

# Press the button under 'Reg'

# Hold the button on the Base for 3 seconds

# Hold the 'Radio' button on the Base for 3 seconds

# Handset should then initialise

# Go to the Base station UI and set up the new account:

Line 66:

Line 54:

File:~~W73pbase~~.jpg|~~2.1.Radio~~ ~~Button~~ on ~~Base~~ ~~Unit~~

File:Handsetsettings.jpg|Scroll to Settings & press Ok.

File:~~Handsetsettings~~.jpg|~~2.4.~~ ~~Scroll~~ to ~~Settings~~ & press Ok.

File:Handsetreg.jpg|Arrow down to 6.Registration the press Ok.

File:Handsetreg2.jpg|Press Register Handset.

File:Handsetreg.jpg|2.5. Arrow down to 6.Registration the press Ok.

File:~~Handsetreg2~~.jpg|~~2.6.~~ ~~Press~~ ~~Register~~ ~~Handset.~~

File:W73pbase.jpg|Radio Button on Base Unit

⚫

</gallery>

= Find the IP address of the Base station & login to setup web pages. =

⚫

By default the Yealink base unit picks up an IP address using DHCP. You can find the IP address from the Handset as follows:

⚫

# Press 'Ok' on the handset and 'Ok' on 'Status'

⚫

# Select 'Base' and press 'Ok'

⚫

# Under IPv4 you will see the IP address e.g. 192.168.1.3 (different for each user).

⚫

# Enter that IP in the address bar of your Web browser.

⚫

# Login with admin credentials. (default is user:admin password:admin).

⚫

File:Handsetstatus.jpg|3.1 Press Ok on the handset and Ok on Status

File:Hansetbase.jpg|3.2 Select Base and press Ok

File:Handsetipadd.jpg|3.3 Under IPv4 you will see the IP address.

</gallery>

Line 77:

Line 81:

# Select 'Account' & 'Register' tab & enter you VoIP number (+44...) in 'Register Name' & 'Username'.

# Enter SIP from your control page into 'Password' box.

# Enter SIP password from your control page into 'Password' box.

# Set 'Server Host' to 'voiceless.aa.net.uk'.

# Click 'Confirm'.

Line 120:

Line 124:

Status -> Handset & VoIP

You should the the account Status as 'Registered'

⚫

Yealink_W53P_SIP_Config.png|VoIP Account settings

</gallery>

===Handset Assignment===

Line 130:

Line 138:

You have the flexibility to decide which VoIP account should ring which handset, and also which account the handsets use to make their outgoing calls.

⚫

Yealink W53P Handset Assignment.png|Number Assignment

⚫

Yealink_W53P_SIP_Config.png|VoIP Account settings

⚫

Yealink W53P ~~Hanset~~ Assignment.png|Number Assignment

Yealink-4handsets1number.png|Four Handsets sharing one VoIP Account

</gallery>

Line 184:

Line 190:

OK --> Call Features (orange) --> Do Not Disturb

⚫

==Factory reset the Yealink DECT Base Station==

⚫

=Registering an additional Handset=

⚫

# Power up handset

⚫

# Press the button under 'Reg'

⚫

# Hold the button on the Base for 3 seconds

⚫

# Handset should then initialise

⚫

# Go to the Base station UI and set up the new account:

⚫

# Account - Number Assignment - or set up a new account:

⚫

## Account - Set Account2 --> Fill in details

⚫

## Account - Handset name --> Set the name

⚫

=Factory reset the Yealink DECT Base Station=

If you have lost the password you will have to factory reset the base station, and the default username and password will then work, and you'll need to configure the unit again.

There are a few ways to factory reset the Yealink base station:

===From web ui===

If you know the password!

Settings -> Upgrade --> Reset

Line 202:

Line 224:

# Wait a further 5 minutes

# Then, reboot the base station by unplugging it from power and plugging it back in

⚫

=Registering an additional Handset=

⚫

# Power up handset

⚫

# Press the button under 'Reg'

⚫

# Hold the button on the Base for 3 seconds

⚫

# Handset should then initialise

⚫

# Go to the Base station UI and set up the new account:

⚫

# Account - Number Assignment - or set up a new account:

⚫

## Account - Set Account2 --> Fill in details

⚫

## Account - Handset name --> Set the name

Line 219:

Line 231:

[[Category:VoIP Phones|~~Gigaset~~ ~~N300~~]]

[[Category:VoIP Phones|Yealink DECT]]