Category:ZyXEL DX3301: Difference between revisions
| Line 24: | Line 24: | ||
== Firmware, More Documents== |
== Firmware, More Documents== |
||
* |
* Firmware: [https://www.zyxel.com/uk/en-gb/support/download?model=dx3301-t0 for the Router DX3301] |
||
* Firmware: [https://www.zyxel.com/uk/en-gb/support/download?model=wx3100-t0 for the Wi-FI extender WX3100] |
|||
* GPL covered code: see https://www.zyxel.com/service-provider/global/en/gpl-oss-software-notice |
* GPL covered code: see https://www.zyxel.com/service-provider/global/en/gpl-oss-software-notice |
||
* Extender quick start quide: https://download.zyxel.com/WX3100-T0/quick_start_guide/WX3100-T0_001.pdf |
* Extender quick start quide: https://download.zyxel.com/WX3100-T0/quick_start_guide/WX3100-T0_001.pdf |
||
Latest revision as of 13:55, 10 April 2025
Summary
- A mid-level router
- Consumer/home grade
- Suitable for ADSL, VDSL and FTTP (1G or below speeds)
- Introduced at A&A April 2025
- A&A Quick start guide: File:AA ZyXEL DX3301 Quick Start.pdf
Basic Specs
- 4x 10/100M/1,000M ports.
- Modem supports VDSL (FTTC) and ADSL/ADSL2+ (Not G.Fast)
- WiFi is:
- 2.4Ghz and 5GHz
- WiFi 6 (2x2 802.11ax)
- Additional MESH extenders available, ZyXEL WX3100
- 2 FXS ports, (ATA) for connecting standard analogue phone devices to a VoIP account
- Power consumption: 24 Watt max (from datasheet)
- Dimensions: 220x35x153 (LWH, mm)
Firmware, More Documents
- Firmware: for the Router DX3301
- Firmware: for the Wi-FI extender WX3100
- GPL covered code: see https://www.zyxel.com/service-provider/global/en/gpl-oss-software-notice
- Extender quick start quide: https://download.zyxel.com/WX3100-T0/quick_start_guide/WX3100-T0_001.pdf
Admin and WiFi passwords
We ship the router with a basic configuration which is just enough to get the router to log in to us and fetch its full configuration for your line. There are settings on the control pane which can set the SSID, passwords etc, but until the router has been sent its full configuration it is in an 'unconfigured' state.
| As shipped / unconfigured | Once configured | |
|---|---|---|
| IP: | 192.168.1.1 | 192.168.1.1 or your public block |
| Username: | admin | |
| Password: | as stated on the rear panel under the A&A card | as printed on the A&A card |
| Wifi Name: | ||
| WiFi Password: | ||
Bridge mode
- The DX3301 can be configured as a ADSL or VDSL bridge - our auto-config can do this for you.
- This is where you have your own ethernet PPPoE router and simply want the DX3301 to be a DSL modem for it
Notes:
- Connect your PPPoE router to any one of the four yellow LAN ports
- Connect the Grey DSL port to your DSL splitter and then the telephone line
- Many features are disabled as they are not needed or usable when in Bridge mode. eg WiFi, Phone, USB
- DHCP server is disabled.
- You can access the router UI on 192.168.1.1 using the factory-set admin password as found on the ZyXEL sticker on the rear (Don't use the custom A&A admin password)
- The only LEDs you'll see lit up are: Power, Sync and Ethernet.
This category currently contains no pages or media.