Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

Ethernet Port Settings: Difference between revisions

← Older editNewer edit →
Content deleted Content added
AA-Andrew (talk | contribs)
autoreview, Bureaucrats, editor, Interface administrators, reviewer, Administrators
12,616 edits
AA-Andrew (talk | contribs)
autoreview, Bureaucrats, editor, Interface administrators, reviewer, Administrators
12,616 edits
Line 11: Line 11:
* Customer router connects to Openreach supplied ONT via Fibre patch lead, not copper RJ45.
* Customer router connects to Openreach supplied ONT via Fibre patch lead, not copper RJ45.


===SFP===
===SFP Requirements for customer router===
For 1Gbit/s bearers, the connection from the Openreach NTE to the customer equipment is presented using multimode mode fibre on LC connectors. A suitable SFP for the customer equipment would be a 550m MMF 850nm SX SFP and a length of multimode cable with LC connectors at each end. your router/switch would also need a SFP port. We can supply a suitable SFP and cable if you require.
For 1Gbit/s bearers, the connection from the Openreach NTE to the customer equipment is presented using multimode mode fibre on LC connectors. A suitable SFP for the customer equipment would be a 550m MMF 850nm SX SFP and a length of multimode cable with LC connectors at each end. your router/switch would also need a SFP port. We can supply a suitable SFP and cable if you require.


Retrieved from "http://support.aa.net.uk/Ethernet_Port_Settings"