Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

Ethernet IP Settings: Difference between revisions

← Older editNewer edit →
Content deleted Content added
AA-Andrew (talk | contribs)
autoreview, Bureaucrats, editor, Interface administrators, reviewer, Administrators
12,616 edits
AA-Andrew (talk | contribs)
autoreview, Bureaucrats, editor, Interface administrators, reviewer, Administrators
12,616 edits
mNo edit summary
Line 57: Line 57:
|}
|}



⚫
==Additional IP blocks==
⚫
If you have additional IP requirements, these will be set up on your control pages and you can change the target address if you need. We will set these up to route to your gateway address initially, assuming (for IPv4) that you are using the last usable address as your firewall/router.


==DNS resolvers==
==DNS resolvers==
Line 67: Line 70:
==Dual routers and VRRP==
==Dual routers and VRRP==
If you wish to run two routers yourself and use a protocol such as VRRP, set the virtual address as the last usable address. You can use the other two addresses as the real addresses of your two routers. We use VRID 42 for VRRP so use a different VRID if you are using VRRP to avoid any clash.
If you wish to run two routers yourself and use a protocol such as VRRP, set the virtual address as the last usable address. You can use the other two addresses as the real addresses of your two routers. We use VRID 42 for VRRP so use a different VRID if you are using VRRP to avoid any clash.

⚫
==Additional IP blocks==
⚫
If you have additional IP requirements, these will be set up on your control pages and you can change the target address if you need. We will set these up to route to your gateway address initially, assuming (for IPv4) that you are using the last usable address as your firewall/router.


==DSL or L2TP Fallback==
==DSL or L2TP Fallback==
Retrieved from "http://support.aa.net.uk/Ethernet_IP_Settings"