Router - ZyXEL P660R-D1: Difference between revisions

From AAISP Support Site
Line 53: Line 53:


==Basic Configuration for PPPoA==
==Basic Configuration for PPPoA==

This will cover BT, TT, BE lines.


[[File:BT-Zyxel.png|300px]]
[[File:BT-Zyxel.png|300px]]

Revision as of 09:54, 20 Haziran 2013

P660rd1.png

LED Status
Steady Flashing Blink Off
Power Power on Power off
Ethernet
DSL In Sync Attempting sync Traffic No Sync
Internet PPP down PPP online


Default Admin Username/Password

Default/Factory Password
Username: admin
Password: 1234
AAISP configured Password
Printed on card with router


Basic Configuration for PPPoA

This will cover BT, TT, BE lines.

BT-Zyxel.png

Bridge config

To configure the ZyxEL as a bridge, the settings to use are as follows, and these settings are set in:

Network > WAN > Internet Connection

Also see the screenshot below:

Name: AAISP (But can be anything)
Mode: Bridge
Encapsulation: RFC 1483
Multiplexing: LLC (VC may work on 20cn, but stick with LLC)
VPI: 0
VCI: 38
ADSL modulation type: Multimode

Zyxel-bridge.png

Netbios Filter