Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

Automatic Line Testing: Difference between revisions

← Older editNewer edit →
Content deleted Content added
Line 13: Line 13:
==Type of Tests==
==Type of Tests==
*For ADSL we will run a 'Status Test' - this will report back the sync speed, the profile, and errored seconds.
*For ADSL we will run a 'Status Test' - this will report back the sync speed, the profile, and errored seconds.
*For FTTC and FTTP we will run an 'End to End' Test - this will report whether the test equipment has detected a fault and, where applicable, line sync speeds and interleaving depth.
*For FTTC and FTTP we will run an 'End to End' Test - this will report whether the test equipment has detected a fault and, for FTTC, line sync speeds and interleaving depth.


These tests (status and end to end) are non-intrusive and should not cause the line to drop.
These tests (status and end to end) are non-intrusive and should not cause the line to drop.
Retrieved from "http://support.aa.net.uk/Automatic_Line_Testing"