General Router Settings: Difference between revisions
(→Basic BE PPPoE Settings (Legacy/Old Connections): remove 404 link) |
(Remove more be) |
||
Line 3: | Line 3: | ||
*[http://www.aaisp.net.uk/kb-broadband-bebt.html Knowledge Base - Difference between BE and BT] |
*[http://www.aaisp.net.uk/kb-broadband-bebt.html Knowledge Base - Difference between BE and BT] |
||
---- |
---- |
||
These are the basic settings for configuring ADSL modems/routers for a connection to AAISP using a BT or a |
These are the basic settings for configuring ADSL modems/routers for a connection to AAISP using a BT or a TT line. (more info in your [[Information Pack]] (available from sales if required). |
||
= Basic BT |
= Basic BT and TT PPPoA Settings = |
||
(Installed after Dec 2010) |
|||
[[Image:BT-Zyxel.png|thumb|150px|BT-Zyxel.png]] |
[[Image:BT-Zyxel.png|thumb|150px|BT-Zyxel.png]] |
||
*Username (as given, eg xx@a.1) |
*Username (as given, eg xx@a.1) |
||
Line 19: | Line 19: | ||
*DNS: 217.169.20.20 217.169.20.21 (2001:8b0::2020 and 2001:8b0::2021 for [[IPv6]]) |
*DNS: 217.169.20.20 217.169.20.21 (2001:8b0::2020 and 2001:8b0::2021 for [[IPv6]]) |
||
More Details on [http://www.aa.net.uk/kb-broadband-router.html |
More Details on [http://www.aa.net.uk/kb-broadband-router.html Router setup knowledgebase] |
||
= Basic BE PPPoE Settings (Legacy/Old Connections)= |
= Basic BE PPPoE Settings (Legacy/Old Connections)= |
Revision as of 17:05, 6 Ocak 2015
Related Pages on the A&A Website:
These are the basic settings for configuring ADSL modems/routers for a connection to AAISP using a BT or a TT line. (more info in your Information Pack (available from sales if required).
Basic BT and TT PPPoA Settings
(Installed after Dec 2010)
- Username (as given, eg xx@a.1)
- Password (as given, can be changed on the Control Pages)
- VPI = 0
- VCI = 38
- MTU = 1500
- PPPoA
- Mux = VC Mux
- Line Type = Auto
- WAN IP = 0.0.0.0 (Your fixed WAN IP will be assigned upon login)
- DNS: 217.169.20.20 217.169.20.21 (2001:8b0::2020 and 2001:8b0::2021 for IPv6)
More Details on Router setup knowledgebase
Basic BE PPPoE Settings (Legacy/Old Connections)
This is for Be lines installed before December 2010, as lines after this will be PPPoA, and will have the same settings as a BT line, as above.
- Username (as given, eg yy@a.1)
- Password (as given, can be changed on the Control Pages)
- VPI = 0
- VCI = 101
- MTU = 1492
- PPPoE
- Mux = LLC
- Line Type = Auto
- WAN IP = 0.0.0.0 (Your fixed WAN IP will be assigned upon login)
- DNS: 217.169.20.20 217.169.20.21 (2001:8b0::2020 and 2001:8b0::2021 for IPv6)