Revision as of 21:18, 6 Ocak 2015

Syslog setup

On a CentOS machine take these steps to get the FB to log to /var/log/local0

Server Side

Enable syslog to receive messages from the network:
- in /etc/sysconfig/syslog, add -r to SYSLOGD_OPTIONS
Set up a syslog facility:
- in /etc/syslog.conf add local0.* -/var/log/local0
Set up logrotate to process the log file (not essential, but useful):
- in /etc/logrotate.d/syslog add /var/log/local? to the first line of files

restart syslog service

Windows

There are various syslog 'server' programs that will receive the syslog messages from the FireBrick and display/log it. One such program is available from www.boris.org.uk.

FireBrick Side

On the FireBrick, add/edit the syslog line as follows:

<syslog server="ip.of.your.server" severity="NOTICE" facility="LOCAL0"/>

You can set the severity to log more (e.g. set to DEBUG), but then you'll get a log line every second! See the Docs for more info.

If you then tail /var/log/local0 you'll see log messages

@@ Line 25: / Line 25: @@
 </syntaxhighlight>
-You can set the severity to log more (eg set to DEBUG), but then you'll get a log line every second! See the Docs for more info.
+You can set the severity to log more (e.g. set to DEBUG), but then you'll get a log line every second! See the Docs for more info.
 If you then tail /var/log/local0 you'll see log messages