FireBrick 2700 Configuration run-through: Difference between revisions

Content deleted Content added

Inline

@@ Line 314: / Line 314: @@
 </syntaxhighlight>
-DNS auto-config:
+'''DNS auto-config''':
 ( since release V0.02.039 )
-The previous config will allow your IPv6-enabled clinets to auto-configure an IP address, and default route.   To configure IPv6 DNS server addresses ( DNS servers that are to be queried over IPv6 ), then there are a couple of options.   Very recent clients may be RFC6106 aware, and be able to recieve DNS server addresses along with the other config in the same Router Announcement form the FB.  To enable this, set the ra-dns option to point to your IPv6 Recursive DNS Server ( in this example, I've added a static IPv6 address 2001:8B0:B7:1::2 to my DNS server box, obviously point it to your own! ):
+The previous config will allow your IPv6-enabled clinets to auto-configure an IP address, and default route from the Router Announcements from the FB.   To configure IPv6 DNS server addresses ( DNS servers that are to be queried over IPv6 ), then there are a couple of options.   Very recent clients may be RFC6106 aware, and be able to recieve DNS server addresses along with the other config in the same Router Announcement from the FB, using the RDNSS option.  To enable this, set the ra-dns option to point to your IPv6 Recursive DNS Server ( in this example, I've added a static IPv6 address 2001:8B0:B7:1::2 to my DNS server box, obviously point it to your own! ):
 <syntaxhighlight>