Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

Stopping Open DNS - ZyXEL P660R-C: Difference between revisions

← Older edit
Content deleted Content added
AA-Paul (talk | contribs)
autoreview, Bureaucrats, reviewer, Administrators
18 edits
No edit summary
AA-Andrew (talk | contribs)
autoreview, Bureaucrats, editor, Interface administrators, reviewer, Administrators
12,616 edits
mNo edit summary
 
(5 intermediate revisions by 2 users not shown)
Line 12: Line 12:
1 Y IP Pr=0, SA=0.0.0.0, DA=[YOUR WAN ADDRESS], DP=53 N D N
1 Y IP Pr=0, SA=0.0.0.0, DA=[YOUR WAN ADDRESS], DP=53 N D N
1 Y IP Pr=0, SA=0.0.0.0, DA=[YOUR LAN ADDRESS], DP=53 N D F
1 Y IP Pr=0, SA=0.0.0.0, DA=[YOUR LAN ADDRESS], DP=53 N D F
i.e.:
ie:


eg, create a new filter set with the following information:
e.g., create a new filter set with the following information:
Filter #: 6,1
Filter #: 6,1
Filter Type= TCP/IP Filter Rule
Filter Type= TCP/IP Filter Rule
Line 32: Line 32:
Action Not Matched= Check Next Rule
Action Not Matched= Check Next Rule


Add a second filter in the set that uses Destination: IP Addr as the LAN address of your router, and set the Action Not Matched to Forward.
Add a second filter in the set that uses Destination: IP Addr as the LAN address of your router, and set the Action Not Matched to Forward. e.g.

Filter #: 6,2
Filter Type= TCP/IP Filter Rule
Active= Yes
IP Protocol= 0 IP Source Route= No
Destination: IP Addr= 81.187.245.141
IP Mask= 255.255.255.255
Port #= 53
Port # Comp= Equal
Source: IP Addr=
IP Mask=
Port #=
Port # Comp= None
TCP Estab= N/A
More= No Log= None
Action Matched= Drop
Action Not Matched= Forward


Then add the filter number to the Remote Node (Menu 11, then edit filter set, AAISP Node, then go to Edit Filter Sets and change it to Yes. Pressing Enter will then take you to a screen where you can enter in the Filter rule number you created.)
Then add the filter number to the Remote Node (Menu 11, then edit filter set, AAISP Node, then go to Edit Filter Sets and change it to Yes. Pressing Enter will then take you to a screen where you can enter in the Filter rule number you created.)
Line 38: Line 55:
The router will restart, but may need a powercycle.
The router will restart, but may need a powercycle.


*Then re-test from the Control Pages: https://clueless.aa.net.uk/dnsresolvers.cgi


[[Category:Open DNS Resolvers]]
[[Category:Open DNS Resolvers]]
[[Category:Router]]
[[Category:AA Routers]]
[[Category:3rd Party Routers]]
Retrieved from "http://support.aa.net.uk/Stopping_Open_DNS_-_ZyXEL_P660R-C"