Router - ZyXEL P660HW-T1: Difference between revisions
Content deleted Content added
Created page with "This page is regarding a legacy product. The ZyXEL P660HW-T1 v2 routers sometimes do not do ADSL2+ full speeds and Annex M in their default configurations. Here is how to m..." |
mNo edit summary |
||
| (3 intermediate revisions by the same user not shown) | |||
| Line 11: | Line 11: | ||
Telnet in, then type: |
Telnet in, then type: |
||
sys edit autoexec.net |
|||
Press "i" |
Press "i" |
||
You should see a colon |
You should see a colon |
||
When you see the colon, type the following command: |
When you see the colon, type the following command: |
||
w dmt2 set largeD=2 |
|||
Press enter, then press "x". |
Press enter, then press "x". |
||
You can verify that autoexec.net contains the new command by typing |
You can verify that autoexec.net contains the new command by typing |
||
sys view autoexec.net" |
|||
After a reboot, the sync rate should be increased. |
After a reboot, the sync rate should be increased. |
||
| Line 28: | Line 29: | ||
Telnet in, then type: |
Telnet in, then type: |
||
sys edit autoexec.net |
|||
Press "i" |
Press "i" |
||
You should see a colon |
You should see a colon |
||
When you see the colon, type the following command: |
When you see the colon, type the following command: |
||
wan ghs set annex m |
|||
Press enter, then press "x". |
Press enter, then press "x". |
||
You can verify that autoexec.net contains the new command by typing |
You can verify that autoexec.net contains the new command by typing |
||
sys view autoexec.net |
|||
After a reboot, the upstream sync rate should be increased, at the expense of some downstream. |
After a reboot, the upstream sync rate should be increased, at the expense of some downstream. |
||
| Line 41: | Line 43: | ||
[[Category: |
[[Category:3rd Party Routers|ZyXEL]] |
||