VMG1312-B10A: Bugs: Difference between revisions
m (→QoS Issues) |
mNo edit summary |
||
| Line 87: | Line 87: | ||
---- |
---- |
||
==QoS Issues== |
|||
====Issue Description==== |
|||
The QoS and traffic limiting features have the potential to be quite useful. However, the default QoS settings have problems if there is a large rsync (over ssh) upload in progress in that DNS queries time out. We have some QoS notes on [[ZyXEL_VMG1312-QoS]]. |
The QoS and traffic limiting features have the potential to be quite useful. However, the default QoS settings have problems if there is a large rsync (over ssh) upload in progress in that DNS queries time out. We have some QoS notes on [[ZyXEL_VMG1312-QoS]]. |
||
Revision as of 14:15, 8 Mayıs 2015
This page lists the problems we have found and raised regarding the ZyXEL VMG1312.
Problem List
TL;DR (Brief overview of the problems listed below)
The main problems are:
- MTU 1500 is not supported on some setups (Internet access will still work fine, but we'd like 1500) - Still under evaluation with ZyXEL, may or may not happen.
- VPNs may not reconnect if PPP drops - until you unplug and replug the LAN-side ethernet cable! We saw this same thing last year with Huawei HG612, which use the same chipset.
Bridging 1508 bytes ethernet
Issue Description
We need the router to support baby jumbo frames bridging to VDSL and ADSL, to support *at least* 1508 bytes to allow RFC4638 PPPoE to a connected device.
Date Reported
2015-02-19
Updates
2015-02-19 ZyXEL development team aware, and are looking in to whether they can support this feature. 2015-03-28 Still ZyXEL HQ are still evaluating the effort to make this change. 2015-04-14 ZyXEL are working on supporting larger Ethernet frame sizes as part of the 'BT Lab modem conformity tests' (SIN 498). No ETA though.
Resolution
None yet.
IPv6 RA on LAN
Issue Description
We are seeing a slight issue with IPv6 RA on the LAN. We are getting a prefix from the PPP link on VDSL. When PPP comes up, several seconds later the router does a DHCPv6 on the WAN, and then does an RA on the LAN, which works. We are puzzled by the noticeable delay in DHCPv6 PD which delays IPv6 connectivity. If PPP drops for any reason it appears to withdraw the RA on the LAN immediately, which is fine. However, when PPP reconnects it does not re-send the DHCPv6 on the WAN. This may be deliberate, and in our case it is probably OK, but it is something of an assumption that the previous DHPCv6 remains valid on the PPP after a reconnect. I'd suggest a new WAN RA/DHCPv6 immediately on every reconnect. Also, it seems not to send an RA on the LAN again for some minutes. This means there is a significant gap in IPv6 availability if there is a PPP drop from any reason.
Date Reported
2015-02-19
Updates
2015-02-19 In hand with ZyXEL.
Resolution
None yet.
Port 1 - Ethernet settings wrong RESOLVED
Issue Description
It seems to be set to 100M fixed with no auto-negotiation. This results in a duplex mismatch when used with any auto-config port and results is slow speed and poor performance.
Date Reported
2015-02-16
Updates
2015-02-18 Inhand with ZyXEL. 2015-03-18 New firmware hopped for April 2015-04-14 New firmware available which fixes this issue, V1.00(AAJZ.5)C0
Resolution
Firmware: V1.00(AAJZ.5)b1| 03/13/2015 has the following release note:
[BUG FIX]1.[ITS:#141200518][TSF] VMG1312-B10A LAN1 interface speed issue.
MLD snooping
Issue Description
There is no way to enable MLD snooping on the LAN interface group without also enabling the router's Router Advertisement feature. This contrasts to IPv4, where I can disable the router's DHCP server but still enable IGMP snooping.
Date Reported
2015-03-06
Updates
None yet.
Resolution
None yet.
PPP restart = broken VPNs AKA UDP Blackholing
Issue Description
Last year we had an problem with Huawei FTTC modems, the standard ones that Openreach supply The bug appears to be that the modem manages to "blacklist" some UDP packets after a PPP restart. Typically this affects VPN tunnels. The short term fix is to unplugged and plugged back in!
We now have what looks to be the same fault on the ZyXELs - both on ADSL and VDSL.
The fix in the Huawei modem was relating to an 'acceleration' setting in the modem. Disabling this feature fixed the fault. -this is not a user setting but built in to the firmware. -a new firmware wil be needed to fix this in the ZyXELs
For a longer description of the Huawei fault see: http://www.revk.uk/2013/11/bt-huawei-fttc-modem-bug-breaking-vpns.html http://www.revk.uk/2013/11/bt-huawei-working-with-us.html https://aastatus.net/1854
Date Reported
2015-05-06
Updates
2015-05-06 - Escalated with ZyXEL/Broadcom
Resolution
None yet.
QoS Issues
Issue Description
The QoS and traffic limiting features have the potential to be quite useful. However, the default QoS settings have problems if there is a large rsync (over ssh) upload in progress in that DNS queries time out. We have some QoS notes on ZyXEL_VMG1312-QoS.
Date Reported
2015-05-08
Updates
We're playing with the settings.
Resolution
None yet.
Template to use for new problems
Issue Title
Issue Description
Description of Issue.
Date Reported
2015-00-00
Updates
None yet.
Resolution
None yet.