VMG1312-B10A: AAISP Configuration: Difference between revisions

← Older edit

Content deleted Content added

Inline

@@ Line 23: / Line 23: @@
 |  Wireless || Configure WiFi || Further Settings on Control Pages: SSID, Password or disable WiFi || 2015-02-01
 |-
-|  Wireless || Configure WiFi for 20Mhz || Instead of 40Mhz see [[VMG1312: WiFi Tips]] || 2015-02-01
+|  Wireless || Configure WiFi for 20&nbsp;MHz || Instead of 40&nbsp;MHz see [[VMG1312: WiFi Tips]] || 2015-02-01
 |-
 |  Wireless || Configure WiFi for AES only|| This disables legacy/insecure TKIP  see [[VMG1312: WiFi Tips]] || 2015-06-16
@@ Line 94: / Line 94: @@
 |Customer LAN
 |Customer LAN
-|MTU 1492
+|MTU 1492, WAN VLAN 802.1q=101
 |----
 !colspan="7"|Routing Configurations - Connecting to another modem
 |----
-!FTTC engineer install
+!FTTC engineer install (not available for new installations)
 |No
 |Port 4
-|plugs in to Openreach modem
+|plugs in to Openreach modem (no longer supplied)
 |Customer LAN
 |Customer LAN
-|1492 MTU. QoS will not know the uplink speed automatically, The rate can be set under Network Setting - Broadband - #3 edit
+|1492 MTU, WAN VLAN 802.1q=101. QoS will not know the uplink speed automatically, The rate can be set under Network Setting - Broadband - #3 edit
 |----
 !FTTP
@@ Line 122: / Line 122: @@
 |Customer PPPoE router
 |Usually Disabled
-|ZyXEL becomes a bridging modem. MTU 1492
+|ZyXEL becomes a bridging modem. MTU 1492. WAN VLAN 802.1q=101
 |----
 !ADSL with Customer own PPPoE router
@@ Line 133: / Line 133: @@
 |----
 |}
 =Making Changes=
 If you make changes to your configuration then you may want to back it up. See: [[VMG1312: Backup Configuration]]
-[[Category:ZyXEL_VMG1312|AAISP Configuration]]
+[[Category:ZyXEL VMG1312-B10A|AAISP Configuration]]