ZyXEL GS1900-8: Difference between revisions
Content deleted Content added
m clean up, typos fixed: eg, → e.g., |
|||
| (2 intermediate revisions by the same user not shown) | |||
| Line 6: | Line 6: | ||
The GS1900-8 is a fanless 8 port gigabit managed switch. It has a web interface to set it up, and is ideal as a small VLAN capable switch. |
The GS1900-8 is a fanless 8 port gigabit managed switch. It has a web interface to set it up, and is ideal as a small VLAN capable switch. |
||
There is also |
There is also a Power over Ethernet version available, the GS1900-8HP, which has a larger PSU and supports PoE. |
||
=Configuration= |
=Configuration= |
||
| Line 51: | Line 51: | ||
*Port 8 is for the FireBrick |
*Port 8 is for the FireBrick |
||
The |
The modems are not VLAN-aware, or even if they are we don't need them to be. We'll set ports 1-4 to tag incoming packets with the correct VLAN, and to send packets to the modems as untagged. |
||
Ports 5, 6 and 7 will be unused, these could be used to access the switch config if you wanted. |
Ports 5, 6 and 7 will be unused, these could be used to access the switch config if you wanted. |
||
| Line 62: | Line 62: | ||
*Plug computer in to port 7 |
*Plug computer in to port 7 |
||
*Set computer to IP: 192.168.1.2 mask: 255.255.255.0 |
*Set computer to IP: 192.168.1.2 mask: 255.255.255.0 |
||
*Log in to the switch via http://192.168.1.1 with admin and 1234 |
*Log in to the switch via http://192.168.1.1 with username: admin and password: 1234 |
||
*From the front page, click the Maintenance icon on the left |
*From the front page, click the Maintenance icon on the left |
||
**Click Configuration, then Restore |
**Click Configuration, then Restore |
||