Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

B10D Control Page Options: Difference between revisions

← Older edit
Content deleted Content added
Aa-jamie (talk | contribs)
75 edits
document bridge mode behavior
AA-Andrew (talk | contribs)
autoreview, Bureaucrats, editor, Interface administrators, reviewer, Administrators
12,654 edits
mNo edit summary
 
(2 intermediate revisions by 2 users not shown)
Line 57: Line 57:
| WANPPPOE || If WAN PPPoE is set to No, this button will send a new configuration to the router to disable WAN PPP and return the 4th Ethernet port back to the LAN. This will cause all settings currently in the router to be lost. If WAN PPPoE is set to Yes, this button will do nothing, as the default configuration of the router is for WAN PPP to be enabled. To re-enable WAN PPPoE after it has been disabled, you will need to perform a factory reset of the router, which will wipe all existing configuration.
| WANPPPOE || If WAN PPPoE is set to No, this button will send a new configuration to the router to disable WAN PPP and return the 4th Ethernet port back to the LAN. This will cause all settings currently in the router to be lost. If WAN PPPoE is set to Yes, this button will do nothing, as the default configuration of the router is for WAN PPP to be enabled. To re-enable WAN PPPoE after it has been disabled, you will need to perform a factory reset of the router, which will wipe all existing configuration.
|-
|-
| BOOTSTRAP || This button sends a TR-069 Boostrap request to the router, which causes the router to request a Bootstrap from the TR-069 server, this will completely reprovision all paramaters in the router, and depending on settings, may wipe all existing configuration.
| BOOTSTRAP || This button sends a TR-069 Boostrap request to the router, which causes the router to request a Bootstrap from the TR-069 server, this will completely reprovision all parameters in the router, and depending on settings, may wipe all existing configuration.
|}
|}


Line 79: Line 79:


To get the router talking to our TR069 server again, you will need to perform a factory reset of the router by pressing and holding the reset button for 10 seconds, and the router will talk to our TR-069 server again. If bridge mode is still set on the control pages, it will go back to bridge and ignore all other settings.
To get the router talking to our TR069 server again, you will need to perform a factory reset of the router by pressing and holding the reset button for 10 seconds, and the router will talk to our TR-069 server again. If bridge mode is still set on the control pages, it will go back to bridge and ignore all other settings.

*See: [[Zyxel_Bridge/Modem_Mode]] for step-by-step instructions for enabling and disabling bridge mode via our Control Pages
Retrieved from "http://support.aa.net.uk/B10D_Control_Page_Options"