VMG1312 Vs VMG3925: Difference between revisions

From AAISP Support Site
mNo edit summary
 
(22 intermediate revisions by 4 users not shown)
Line 1: Line 1:
[[File:Vmg1312-b10d.png|250px|thumb|ZyXEL VMG1312-B10D]]
[[File:VMG3925-B10B-Large.png|300px|thumb|ZyXEL VMG3925-B10B]]

Thais page describes the differences between the ZyXEL VMG1312-B10D and the ZyXEL VMG3925-B10B routers.
Thais page describes the differences between the ZyXEL VMG1312-B10D and the ZyXEL VMG3925-B10B routers.


==The main differences are:==
==The main differences are==
*VMG3925 is more expensive
*VMG3925 is more expensive
*VMG3925 has 2.4 and 5G WiFi radio, the VMG1312 has only 2.4G
*VMG3925 has 2.4 and 5G WiFi radio, the VMG1312 has only 2.4G
Line 11: Line 8:
*VMG3925 has a dedicated WAN Ethernet port, the VMG1312 has a shared LAN/WAN Ethernet port
*VMG3925 has a dedicated WAN Ethernet port, the VMG1312 has a shared LAN/WAN Ethernet port
*VMG3925 has a better wall mount
*VMG3925 has a better wall mount

In terms of hardware differences between the router:

The main difference, is the addition of an additional 5 GHz wireless
radio alongside the existing 2.4 GHz band one. This is of benefit to
customers in areas where the 2.4 GHz band is heavily congested.

5 GHz does NOT have a "longer reach" than 2.4 GHz, so it will not help in cases of signal attenuation.
It does however help in cases where the 2.4 GHz band has too many other devices on it.

It was believed that the VMG3925 has an extra common-mode noise filter on the telephone line, but this is not the case.


This router also has a dedicated WAN port, for FTTP. No configuration is
necessary to turn this on, or off. It is enabled by default.

The other difference is that instead of 100MBit/sec LAN ports on the
router, it has 1GBit/sec LAN ports. This may be beneficial for FTTP
customers as to not have the LAN ports becoming a bottleneck.


== Detailed differences ==
== Detailed differences ==
Line 16: Line 32:
{| class="wikitable"
{| class="wikitable"
|-
|-
! !! VMG1312-B10D !! VMG3925-B10B
! !! VMG1312-B10D !! VMG3925-B10B !! VMG3925-B10C
|-
| || [[File:Vmg1312-b10d.png|150px]] || [[File:VMG3925-B10B-Large.png|200px]] || [[File:VMG3925-B10C-200.png|200px]]
|-
| Notes || || ||
|-
|-
| Dimensions with stand (mm)|| 160Wx115Hx60D || 185Wx147Hx85D
| Dimensions with stand (mm)|| 160Wx115Hx60D || 185Wx147Hx85D || 180Wx145Hx29.8D
|-
|-
| Wall mountable || Suboptimal || Yes
| Wall mountable || Suboptimal || Yes || Yes
|-
|-
| PSU Rating || 12V 1A || 12V 2A
| PSU Rating || 12V 1A || 12V 2A || 12V 2A
|-
|-
| CPU/SoC || Broadcom BCM63381 || Broadcom BCM63168
| CPU/SoC ||[https://www.broadcom.com/products/broadband/xdsl/bcm63381 Broadcom BCM63381] || [https://www.broadcom.com/products/broadband/xdsl/bcm63168 Broadcom BCM63168]
|-
|-
| Architecture || BMIPS4350 || BMIPS4350
| Architecture || BMIPS4350 || BMIPS4350
Line 30: Line 50:
| CPU Cores|| 2 || 2
| CPU Cores|| 2 || 2
|-
|-
| CPU Frequency || 600MHz || 400MHz
| CPU Frequency || 600 MHz || 400 MHz
|-
|-
| RAM || 64MB || 128MB
| RAM || 64MB || 128MB
Line 36: Line 56:
| Flash || 128MB|| 128MB
| Flash || 128MB|| 128MB
|-
|-
| Switch chipset || Onboard the BCM63381 SoC || BCM53125 (Discrete)
| Switch chipset || On board the BCM63381 SoC ||[https://www.broadcom.com/products/ethernet-connectivity/switching/roboswitch/bcm53125/ BCM53125](Discrete)
|-
|-
| LAN Ethernet || 10/100M <br/>(To SoC)|| 10/100/1000M <br/> (To Switchchip)
| LAN Ethernet || 4 Ports 10/100M <br/>(To SoC)||4 Ports 10/100/1000M <br/> (To Switchchip)
|-
|-
| WAN Ethernet || Virtual port from LAN 4 || Dedicated 10/100/1000M port<br/>(To Switchchip)
| WAN Ethernet || Virtual port from LAN 4 || Dedicated 10/100/1000M port<br/>(To Switchchip) || 10/100/1000M ports
|-
|-
| Wireless Protocols || 802.11 b/g/n || 802.11 a/b/g/n/ac
| Wireless Protocols || 802.11 b/g/n || 802.11 a/b/g/n/ac || 802.11 a/b/g/n/ac
|-
|-
| 2.4GHz Wireless || Yes || Yes
| 2.4&nbsp;GHz Wireless || Yes || Yes || Yes
|-
|-
| 2.4GHz radio chains || 2 || 2
| 2.4&nbsp;GHz radio chains || 2 || 2
|-
|-
| 2.4GHz chipset || BCM43227 (Discrete) || BCM6362 (On BCM63168 SoC)
| 2.4&nbsp;GHz chipset || [https://www.broadcom.com/products/wireless/wireless-lan-infrastructure/bcm43224 BCM43227] (Discrete) || [https://www.broadcom.com/products/broadband/xdsl/bcm6362 BCM6362] (On BCM63168 SoC)
|-
|-
| 5GHz Wireless || No || Yes
| 5&nbsp;GHz Wireless || No || Yes || Yes
|-
|-
| 5GHz radio chains || N/A || 3
| 5&nbsp;GHz radio chains || N/A || 3 || 3
|-
|-
| 5GHz chipset || N/A || Broadcom BCM43602 (Discrete)<br/>SKY85712-21 RF Front-End
| 5&nbsp;GHz chipset || N/A ||[https://www.broadcom.com/products/wireless/wireless-lan-infrastructure/bcm4360 Broadcom BCM43602] (Discrete)<br/>[http://www.skyworksinc.com/Product/1791/SKY85712-21 SKY85712-21 ] RF Front-End
|-
|-
| xDSL Chipset || Broadcom BCM6303 ADSL/VDSL || Broadcom BVM6302 ADSL/VDSL
| xDSL Chipset || Broadcom BCM6303 ADSL/VDSL || Broadcom BCM6302 ADSL/VDSL
|-
|-
| USB || Yes, 2.0 || Yes, 2.0
| USB || Yes, 2.0 || Yes, 2.0 || Yes, 2.0
|}
|}


You may note that the VMG3925-B10B has a slower CPU, however it also contains more dedicated hardware for packet processing compared to the VMG1312-B10D which needed the extra CPU clock cycles to deal with processing packets.
You may note that the VMG3925-B10B has a slower CPU, however it also contains more dedicated hardware for packet processing compared to the VMG1312-B10D which needed the extra CPU clock cycles to deal with processing packets.


The VMG3925-B10B's SoC contains 1 Gigabit PHY, which connects to the Switch chip for the WAN and LAN ports. Radios are connected to the SoC, so packets passing through LAN<>WLAN or WAN<>WLAN would be limited to the bandwidth of the single Gigabit PHY inside.
The VMG3925-B10B's SoC contains 1 Gigabit PHY, which connects to the Switch chip for the WAN and LAN ports. Radios are connected to the SoC, so packets passing through WAN/LAN<>WLAN would be limited to the bandwidth of the single Gigabit PHY inside assuming no other limiting factors i.e. WAN speed, WLAN radio bandwidth.


[[Category:AA Routers]]
[[Category:AA Routers]]
[[Category:ZyXEL VMG3925 B10B]]
[[Category:ZyXEL VMG3925 B10B]]
[[Category:ZyXEL VMG1312 B10D]]
[[Category:ZyXEL VMG1312 B10D]]
[[Category:ZyXEL VMG3925 B10C]]

Latest revision as of 12:06, 24 Haziran 2020

Thais page describes the differences between the ZyXEL VMG1312-B10D and the ZyXEL VMG3925-B10B routers.

The main differences are

  • VMG3925 is more expensive
  • VMG3925 has 2.4 and 5G WiFi radio, the VMG1312 has only 2.4G
  • VMG3925 has Gigabit Ethernet ports, the VMG1312 has 100M ports
  • VMG3925 is physically larger, even though they are a similar shape
  • VMG3925 has a dedicated WAN Ethernet port, the VMG1312 has a shared LAN/WAN Ethernet port
  • VMG3925 has a better wall mount

In terms of hardware differences between the router:

The main difference, is the addition of an additional 5 GHz wireless radio alongside the existing 2.4 GHz band one. This is of benefit to customers in areas where the 2.4 GHz band is heavily congested.

5 GHz does NOT have a "longer reach" than 2.4 GHz, so it will not help in cases of signal attenuation. It does however help in cases where the 2.4 GHz band has too many other devices on it.

It was believed that the VMG3925 has an extra common-mode noise filter on the telephone line, but this is not the case.


This router also has a dedicated WAN port, for FTTP. No configuration is necessary to turn this on, or off. It is enabled by default.

The other difference is that instead of 100MBit/sec LAN ports on the router, it has 1GBit/sec LAN ports. This may be beneficial for FTTP customers as to not have the LAN ports becoming a bottleneck.

Detailed differences

VMG1312-B10D VMG3925-B10B VMG3925-B10C
Vmg1312-b10d.png VMG3925-B10B-Large.png VMG3925-B10C-200.png
Notes
Dimensions with stand (mm) 160Wx115Hx60D 185Wx147Hx85D 180Wx145Hx29.8D
Wall mountable Suboptimal Yes Yes
PSU Rating 12V 1A 12V 2A 12V 2A
CPU/SoC Broadcom BCM63381 Broadcom BCM63168
Architecture BMIPS4350 BMIPS4350
CPU Cores 2 2
CPU Frequency 600 MHz 400 MHz
RAM 64MB 128MB
Flash 128MB 128MB
Switch chipset On board the BCM63381 SoC BCM53125(Discrete)
LAN Ethernet 4 Ports 10/100M
(To SoC)		 4 Ports 10/100/1000M
(To Switchchip)
WAN Ethernet Virtual port from LAN 4 Dedicated 10/100/1000M port
(To Switchchip)		 10/100/1000M ports
Wireless Protocols 802.11 b/g/n 802.11 a/b/g/n/ac 802.11 a/b/g/n/ac
2.4 GHz Wireless Yes Yes Yes
2.4 GHz radio chains 2 2
2.4 GHz chipset BCM43227 (Discrete) BCM6362 (On BCM63168 SoC)
5 GHz Wireless No Yes Yes
5 GHz radio chains N/A 3 3
5 GHz chipset N/A Broadcom BCM43602 (Discrete)
SKY85712-21 RF Front-End
xDSL Chipset Broadcom BCM6303 ADSL/VDSL Broadcom BCM6302 ADSL/VDSL
USB Yes, 2.0 Yes, 2.0 Yes, 2.0

You may note that the VMG3925-B10B has a slower CPU, however it also contains more dedicated hardware for packet processing compared to the VMG1312-B10D which needed the extra CPU clock cycles to deal with processing packets.

The VMG3925-B10B's SoC contains 1 Gigabit PHY, which connects to the Switch chip for the WAN and LAN ports. Radios are connected to the SoC, so packets passing through WAN/LAN<>WLAN would be limited to the bandwidth of the single Gigabit PHY inside assuming no other limiting factors i.e. WAN speed, WLAN radio bandwidth.

Retrieved from ‘http://support.aa.net.uk/index.php?title=VMG1312_Vs_VMG3925&oldid=14597’