ZyXEL Port Forwarding: Difference between revisions

(2 intermediate revisions by 2 users not shown)

Line 1:

[[Category:ZyXEL VMG1312-B10A]]

[[Category:ZyXEL VMG1312 B10D]]

[[Category:ZyXEL VMG3925 B10C]]

Precis: This guide is intended to help you open an '''incoming''' connection

Line 45:

Line 47:

Other settings of interest are:

* Order: there may be a rule of higher priority (lower order number here) that may override this rule.

* Source IP Address: it's possible to ~~whitelist~~ specific originating IP ranges (work, known friends, etc). Leaving this blank lets any IP in.

* Source IP Address: it's possible to allow specific originating IP ranges (work, known friends, etc). Leaving this blank lets any IP in.

* Select Service: a set of predefined services and port mappings can be specified on the "Protocol" tab then picked from the drop-down here, rather than manually specifying 8080.

* Rate Limit: useful for throttling the amount of bandwidth needed, preventing connections from causing stuttering when streaming media or interrupting VoIP usage, for example.

Line 51:

Line 53:

== B: Setting a Port Forward rule ("where do we go?") ==

This is needed to route the incoming port connection through to.

This is needed to route the incoming port connection through to. '''This part is only needed if you are doing NAT.'''

# Navigate to NETWORK SETTING > NAT > Port Forwarding