Category:Technicolor DGA0122: Difference between revisions

(6 intermediate revisions by 2 users not shown)

Line 13:

==DGA0122 and DWA0120==

AAISP started selling the DGA0122 in December 2020. Supply problems (Due to Brexit) did mean a lack of stock in January 2021 and the DWA0120 was supplied as an alternative. The two are similar, so rather than having separate pages for the two models, we're combining the information for both here.

DGA0122 was offered up until December 2024.

'''Notable Differences:'''

*DGA0122 has two analogue telephone ports for [[DGA0122_VoIP|VoIP support]]

*DGA0122 has two analogue telephone ports (ATA) for [[DGA0122_VoIP|VoIP support]]

==Basic Specs==

*4x 10/100M/1,000M ports.

*Modem supports VDSL (FTTC) and ADSL/ADSL2+ (Not G.Fast)

*WiFi is:

**2.4GHz WiFi-4, (2x2) IEEE 802.11n

**5GHz, WiFi-5, (3x3) IEEE 802.11ac

*2 FXS ports, for connecting an analogue phone to a [[DGA0122_VoIP|VoIP account]] '''DGA0122 only'''

*2 FXS ports, (ATA) for connecting standard analogue phone devices to a [[DGA0122_VoIP|VoIP account]] '''DGA0122 only'''

==User information==

Line 32:

Line 34:

*ADSL1, ADSL2+

*VDSL (FTTC)

*''G.Fast'' - ~~using the~~ Ethernet WAN port connected '''to an existing G.FAST modem'''

*''G.Fast'' - plug Ethernet WAN port connected '''to an existing G.FAST modem'''

*''FTTP, FTTPoD'' - ~~using the~~ Ethernet WAN port '''to the fibre termination 'modem''''

*''FTTP, FTTPoD'' - plug Ethernet WAN port '''to the fibre termination 'modem'''' - suitable for 1G/s FTTP (see note on speeds)

'''Bridge mode:''' The automatic A&A configuration will not configure these routers as 'bridge'. If you want to use your own PPPoE router. In this case our basic ZyXEL is a better choice, or you can configure it manually: https://support.aa.net.uk/DGA0122_Bridge_Mode

===Speeds===

This router can be used with faster FTTP circuits, eg up to 1Gb/s. Throughput on wifi will be limited to much lower speeds, but devices connected using wired connections should see around 950 Mbps when using our speed tester.

==Admin and WiFi passwords==

Line 45:

Line 50:

!Once configured

|-

!IP:

|192.168.1.1

|192.168.1.1 or your public block

|-

!Username:

|colspan="2" |admin (or engineer for some superpowers)

|-

!Password:

|rowspan="3"| as stated on the rear panel

|rowspan="3"| as printed on the A&A card

|-

!Wifi Name:

|-

!WiFi Password:

|}

Line 66:

Line 71:

*[[DGA0122_CQM_Graphs_Show_Latency|CQM graphs show latency spikes]]

*[[DGA0122_No_IPv6|IPv6 seemingly enabled, but not actually working]]

* Having problems with a Sonos smart speaker? Try a reboot of the Sonos as short term fix, or use a cable... see: https://support.sonos.com/en-us/article/technicolor-dga0122-compatibility

[[Category:AA Routers]]